Specification - LG 42LD420 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LD01B
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature
: 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage(AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Module General Specification
No. Item
1 Display Screen Device
2 Aspect Ratio
3 LCD Module
4 Storage Environment
5 Input Voltage
6 Power Consumption
8 Pixel Pitch
9 Back Light
10 Display Colors
11 Coating
Copyright ©2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
107 cm(42 inch) wide color display module
16:9
107 cm(42 inch) TFT LCD FHD
Temp. : -20 ~ 60 deg
Humidity : 10 ~ 90 %
AC 100-240 V~ 50 / 60 Hz
Power on (Blue)
LGD 163.0 W
0.4845 mm x 0.4845 mm
EEFL
1.06 Billion(FHD LGD),16.7 M (others)
3H, AG
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
CCFL/EEFL LCD
LCD (Module) + Backlight(Lamp)
- 6 -
Remark
LGE Internal Use Only