Using Basic Functions; Setting Up The Tv; Using The Remote Control To Navigate The On-Screen Menus - Sony WEGA Trinitron KV-25FS150 Operating Instructions Manual

Using Basic Functions

Setting Up the TV

After you have finished connecting your TV, use Auto Program to set up your analog and digital channel
lists. During Auto Program, the TV will automatically search for available channels and program
receivable channels.
Initial Setup
Language:
Move Select
1
Press V or v to select the desired menu
language, then press
✍
The Initial Setup screen appears each time until you select No on Display this menu next time option.
To perform Auto Program again:
1
WEGA GATE
Press .
2
Press v to highlight Settings menu. Press
3
Press v to highlight Channel Setup. Press
4
Press v to highlight Auto Program. Press
5
Press v or V to highlight Yes. Press
6
After Auto Program finishes, press

Using the Remote Control to Navigate the On-Screen Menus

SOUND
VOL CH
MODE
+
WEGA GATE WEGA GATE
RETURN
RESET
SLEEP
16 9
6
English
Español
Français
End
WEGA GATE
.
to select.
to select.
to select.
to search for channels.
WEGA GATE
to exit.
Move
Select
Initial Setup
First please connect
cable/antenna
Start Auto Program now?
Yes
No
Move Select
2
Press v or V to select Yes, then press
preset the channels automatically.
To skip automatic channel preseting, select
No, then press .
To navigate on the on-screen menus, use the
"arrow" buttons (V, v, B, b) to move the
cursor. Pressing these arrows will cause the
cursor to move in the corresponding direction.
Pressing center button
select an option.
End
WEGA GATE
to
will allow you to