www.kleton.com
www.kleton.com
www.kleton.com
www.kleton.com
www.kleton.com
TOOLS NEEDED
TOOLS NEEDED
TOOLS NEEDED
PARTS
Small Washer x 4
Small Bolt x 4
Small Bolt x 4
Small Bolt x 4
Petit boulon x 4
Small Bolt x 4
Drawer Lock x 1
Plastic Cable Ring and Cover x1
Large Bolt x 44
Large Bolt x 42
Large Bolt x 44
Small Bolt x 4
Grand boulon x 42
Large Bolt x 44
Leg x 4
Adjustable Foot x 4
Adjustable Foot x 4
Large Leg Bolt x 4
Large Bolt x 44
Grand boulon pour
Adjustable Foot x 4
patte x 4
Top Shelf x 1
DRAWER TRACK
Desk Top x 1
Desk Top x 1
Adjustable Foot x 4
Bottom Shelf x 1
Desk Top x 1
Desk Top x 1
Dessus x 1
Drawer x 1
Drawer x 1
Drawer x 1
Drawer x 1
Desk Top x 1
Tiroir x 1
OPEN FLOOR
WALL MOUNT SHOP DESK
OPEN FLOOR SHOP DESK
SHOP DESK
OPEN FLOOR
OPEN FLOOR
PUPITRE D'ATELIER OUVERT
Model FI518
SHOP DESK
SHOP DESK
Model FI519
OPEN FLOOR
Model FI519 / No modèle FI519
Model FI519
Model FI519
SHOP DESK
Model FI519
www.kleton.com
Phillips Screwdriver
Phillips Screwdriver
TOOLS NEEDED
10 mm Wrench
Phillips Screwdriver
10 mm Wrench
Phillips Screwdriver
7 mm Wrench
Phillips Screwdriver
7 mm Wrench
10 mm Wrench
10 mm Wrench
10 mm Wrench
7 mm Wrench
7 mm Wrench
7 mm Wrench
ASSEMBLY CONTINUED
Small Lock Washer x 4
Small Nut x 4
Small Nut x 4
Small Nut x 4
Petit écrou x 4
Small Bolt x 4
Small Nut x 4
Large Nut x 44
Large Nut x 46
Large Nut x 44
Small Nut x 4
RELEASE LEVER
Grand écrou x 46
Large Bolt x 44
Large Nut x 44
Drawer Track x 2
Adjustable Foot x 4
Adjustable Foot x 4
Large Nut x 44
Pied ajustable x 4
Desk Top x 1
Drawer x 1
www.kleton.com
OPEN FLOOR
SHOP DESK
Model FI519
TOOLS NEEDED / OUTILS REQUIS
TOOLS NEEDED
PARTS / PIÈCES
PARTS - PIÈCES
PARTS
PARTS
DRAWER ASSEMBLY
PARTS
Small Bolt x 4
PARTS
1.
Remove drawer slides from the outsides of the
Small Washer x 4
Small Washer x 4
drawer. Press the drawer slide release lever to
Small Washer x 4
PARTS
Petite rondelle x 4
remove slides completely. (See Figure 4)
Small Nut x 4
NOTE: Depending on the side, press release
Small Washer x 4
lever either down or up to remove slides.
Large Bolt x 44
Drawer Lock x 1
Drawer Lock x 1
Drawer Lock x 1
Verrou de tiroir x 1
Large Nut x 44
Drawer Lock x 1
Adjustable Foot x 4
Leg x 4
Figure 4
Leg x 4
Leg x 4
Leg x 4
2. Attach drawer slides to drawer tracks using 2 small
Patte x 4
Leg x 4
bolts, washers, lock washers and nuts. Extend drawer
slide completely to attach to track. Insert center bolt
first to align front bolt hole. (See Figure 5)
Leg x 4
Figure 5
3. Insert drawer tracks into inside of desk top, aligning
front and back bolt holes. Drawer slides must
face inward. Use 4 large bolts and 4 large nuts to
assemble each drawer track to the desk top.
(See Figure 6)
OPEN FLOOR
SHOP DESK
Model FI519
Phillips Screwdriver /
Tournevis Phillips
Phillips Screwdriver
10 mm Wrench / Clé 10 mm
10 mm Wrench
7 mm Wrench / Clé 7 mm
7 mm Wrench
Small Lock Washer x 4
Small Lock Washer x 4
Small Lock Washer x 4
Petite rondelle de blocage x 4
Small Washer x 4
Small Lock Washer x 4
Small Lock Washer x 4
Plastic Cable Ring and Cover x1
Plastic Cable Ring and Cover x1
Small Washer x 4
Drawer Lock x 1
Plastic Cable Ring and Cover x1
Plastic Cable Ring and Cover x1
Drawer Track x 2
Drawer Lock x 1
Desk Top x 1
Top Shelf x 1
Top Shelf x 1
Top Shelf x 1
Top Shelf x 1
Top Shelf x 1
Tablette supérieure x 1
Bottom Shelf x 1
Drawer x 1
Bottom Shelf x 1
Bottom Shelf x 1
Bottom Shelf x 1
Bottom Shelf x 1
Tablette inférieure x 1
PARTS
Small Nut x 4
Large Nut x 44
Small Lock Washer
Leg x 4
Drawer Track x 2
Drawer Track x 2
Drawer Track x 2
Plastic Cable Ring and
Rail pour tiroir x 2
Drawer Track x 2
Drawer T
Top Shelf x 1
Small
Drawe