Advertisement
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable
batteries, the appliance has to be fully discharged every 6 months
approximately. Then recharge the appliance to full capacity, again
for 16 hours.
Comb Guides
This appliance is supplied with 8 comb guides:
• To attach a comb guide, ensure the appliance is switched off. Position
the comb guide over the front of the clipper blade and slide over the
head. Push and click the rear of the comb guide into position.
• To remove the comb guide, ensure the appliance is switched off.
Push the tab on the rear of the comb guide away from the head and
lift off.
Taper Control
The taper control with 5-position lever enables fine cut adjustment for
precision clipping.
• To increase the cutting length, push the lever down.
• To reduce the cutting length, push the lever up.
Preparation for Use
• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc.
Cutting Length
3mm
6mm
9.5mm
13mm
16mm
19mm
22mm
25mm
Grade
#1
#2
#3
#4
#5
#6
#7
#8
Advertisement
