Advertisement
To charge the appliance:
Mains Operation
• Ensure the appliance is switched off.
• Connect the adaptor to the base of the appliance and plug the
adaptor into a suitable mains socket.
• The charging indicator will illuminate when the adaptor is correctly
inserted into the appliance and connected to the mains.
• The appliance is now ready for use.
• NOTE: The appliance should not be used for longer than 20 minutes
when operated from the mains.
Cordless Operation
• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch on. The charging indicator will illuminate
when the adaptor is correctly inserted into the appliance and
connected to the mains.
• Once the appliance is fully charged, unplug the adaptor from the
mains.
• Ordinarily, the appliance may be charged overnight.
• Although there is no risk of over charging, it is not advisable to charge
the appliance continuously for more than 24 hours. This will help
prolong the life of the battery.
Oiling Instructions
IMPORTANT! It is highly recommended before each use to oil the blades
with the oil provided. This ensures optimum cutting performance.
For the first use you will need to use the oil supplied with the product,
unscrew the cap and cut off the very end of the plastic tube with a pair
of scissors to release the oil.
To oil the blades ensure the unit is switched on. Gently squeeze the
oil tube and apply 2 drops of oil onto the blades. Leave the unit on for
a further few seconds to allow the oil to thoroughly spread the length
of the blades. Switch off the unit and remove any excess oil by gently
dabbing with a cloth.
Advertisement
