Other Functions - Panasonic SA-HE200 Operating Instructions Manual

Other functions

HQ
SOUND MODE
RE-MASTER
^ HQ ENHANCED
WAKE
RE-MASTER SOUND MODE SURROUND
8
DSP DOLBY
NEO:6
SOURCE DIRECT SOUND MODE PRO LOGIC 2
PHONES INPUT DVD
A SPEAKERS B MODE 6CH INPUT
INPUT
MODE
DISPLAY
SOUND MODE CHANNEL VOLUME
RE-MASTER
18
RQT6252
INPUT SELECTOR
MULTI DECODER
DOLBY DOLBY DOLBY DTS-ES DTS NEO:6
DIGITAL EX DIGITAL PRO LOGIC 2
TAPE
- BAND
RDS 2 TUNING 1
MONITOR – FM MODE MEMORY PRESET
DISPLAY PTY SEARCH PTY SELECTOR
MODE
S-VIDEO IN VIDEO IN
TV VCR DVD
TUNER/BAND MD TAPE CD
RECEIVER
TOP MENU MENU
ENTER
RETURN
SLOW /SEARCH
SKIP
STOP PAUSE PLAY
MUTING
INPUT
SUBWOOFER SELECTOR
1 2 3
SOURCE DIRECT
INPUT MODE
4 5 6 INPUT MODE
7 8 9 DVD 6CH
DIRECT TUNING/
0
10/-/--
DISC TIMER
/ L
ENHANCED
RE-MASTER / L / R
SURROUND
DOLBY
SFC EFFECT LEVEL
PROLOGIC 2
BALANCE
NEO:6 TEST TONE BALANCE
TV VOL TV/AV
DIMMER
TONE
AUDIO GROUP PAGE SETUP
DVD
HQ sound mode
HQ sound mode uses a system that varies the actual gain of the
amplifier. This helps provide clear sound when listening at regular
volume levels.
Press [HQ SOUND MODE].
VOLUME
For your reference
You can only raise the volume to –10 dB when HQ sound mode is
DOWN UP
on and the level is automatically lowered to this level if you turn HQ
sound mode on when the level is higher.
VCR 3
L AUDIO IN R
Re-master
Using 1/f algorithm technology, this original Panasonic feature
boosts the frequencies of the higher harmonics that are lost during
recording due to compression.
Press [RE-MASTER] to select "EFFECT 1",
"EFFECT 2", "EFFECT 3" or "EFFECT 4".
When Re-master is on, the current level appears, then each time
you press the button:
EFFECT 1: for fast tracks (pop and rock)
EFFECT 2: for tracks with a variety of tempos (jazz)
EFFECT 3: for slow tracks (classical)
EFFECT 4: for compressed audio signals
OFF: the re-master processing is off.
Input mode
This unit automatically detects whether input is digital or analogue,
but you can fix the input mode.
Press [INPUT MODE] to select "AUTO", "ANALOG"
or "DIGITAL".
For your reference
/ R
¡When input is DIGITAL
The tape monitor cannot be used.
Balance
You can adjust the balance of the front speakers.
1 1 Press [BALANCE].
2 2 Press [–/L] or [+/R] to adjust.
Tone
You can adjust the level of the bass and treble.
1 1 Press [TONE] to select "BASS" or "TREBLE".
2 2 Press [–/L] or [+/R] to adjust bass/treble.
For your reference
¡To adjust the tone
The STEREO DSP mode must be on and input must be either
analogue or PCM signals. You cannot adjust the tone while the
SOURCE DIRECT mode is on or if DVD 6CH INPUT is selected.