Resetting To Factory Settings (Reset); Disposal; Maintenance; Exterior Cleaning - Endress+Hauser Cerabar PMP21 Operating Instructions Manual

Cerabar PMP21 IO-Link
Endress+Hauser
Changing the failsafe mode
From MAX to MIN
From MIN to MAX
10.4.1 Alarm current
Description
Configured min. alarm current
1) Product Configurator order code "Service"
10.5

Resetting to factory settings (reset)

See parameter description Reset to factory settings (RES) →  59.
10.6

Disposal

When disposing, separate and recycle the device components based on the materials.
11

Maintenance

No special maintenance work is required.
Keep the pressure compensation element (1) free from contamination.
11.1

Exterior cleaning

Please note the following points when cleaning the device:
• The cleaning agents used should not corrode the surfaces and the seals
• Mechanical damage to the process membrane, e.g. due to pointed objects, must be
avoided.
• Observe the degree of protection of the device. See the nameplate if necessary.
After writing to the device
Active immediately
Active immediately
Option
IA
1
Maintenance
1)
A0022141
41