Subscribe to Our Youtube Channel
Related Manuals for Shott SF38
Summary of Contents for Shott SF38
- Page 1 SF15/PPF15 SF25/PPF25 SF30/PPF30 SF38/PPF38 SF45/PPF45 SF60/PPF60 SF65/PPF65 SF85/PPF85 SF200/PPF200 (EN) USTOMER MANUAL...
- Page 2 Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 2-28...
- Page 3 I N D E X Content organisation and consultation methods..................4 General warnings and user information....................6 Product presentation..........................8 Technical specifications and features....................9 Installation............................10 Operations and use..........................19 User instructions..........................20 Routine, scheduled and extraordinary maintenance................22 Troubleshooting...........................
- Page 4 Content organisation and consultation methods. 1.1 Symbols. Indicates hazardous situations and warnings. Carefully read the parts of the user manual marked with this symbol. Indicates that work must not be performed on live electrical devices. This work may only begin after all suitable safety measures required by current international and/or national regulations are taken.
- Page 5 Fig. 4 Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 5-28...
- Page 6 2.2.1 General warnings. SHOTT International srl continuously strives to improve its products. We trust the user will understand the technical modifications SHOTT International srl reserves the right. SHOTT International srl is not liable for any damages due to improper product use.
- Page 7 Never put your hands in the water if the product (pump) is in operation. The product (pump) must never be operated in the swimming pool when people are present. Do not submerge the product in water. Be sure to disconnect the power plug from the power outlet before operating on the product (pump). Attention to the inlet/outlet points because they can trap parts of the body and/or hair and cause serious personal injuries and even death.
- Page 8 2.3 Contacts and useful addresses. Information at: • Shott International srl +39 049 9401150. • www.shott.it. Product presentation. 3.1 Product scope. These filters (product) are the most reliable nowadays in the market for the cleaning and the maintenance of your domestic swimming pool. They find their application from children to professional’s aboveground pools.
- Page 9 Technical specifications and features. See Tab. 2. The hydraulic parts used for the building of the system which shall include the product modify the performance (head and flowrate) of the pump. SF15 SF25 SF30 SF38 SF45 SF60 SF65 SF85 SF200 PPF15...
- Page 10 Installation. 5.1 Necessary tools. See Fig. 8. Fig. 8 5.2 Storage features and conditions. The product must be stored in a dry place, protected from weather. 5.3 Transport. Handle the product with care to avoid damages. 5.4 Handling. Be really careful when moving the product (full of filter media, sand) because it is very heavy. 5.5 Positioning.
- Page 11 Please remember that water must be conveyed to the product through an appropriate pump (Fig. 10). Fig. 10 Make sure the product is positioned in a place where noise generated during normal operations does not create disturbances. The product must run in a horizontal position. Make sure its position is not altered once it is correctly placed.
- Page 12 Fig. 13 3. Place the special funnel (Fig. 14, #4) on the tank’s mouth, paying attention to cover properly the tube, and start to pour the filter media (quartz sand not supplied into the tank, Fig. 15). Fig. 14 Fig. 15 Once you refilled the tank with filter media until the higher line (around 2/3 of the tank’s height) remove the funnel.
- Page 13 5. Clean really carefully the tank’s neck, place the multifunctional valve taking care that the tube enter in the central hole (Fig. 17). Fig. 17 Insert the pipe into the central hole, taking care not to move the O-ring from its housing. 6.
- Page 14 Fig. 20 Position the O-rings on the hosetail (Fig. 21). Fig. 21 Proceed as follows: 1. Screw the two hosetail (Fig. 22). Fig. 22 2. Insert onto the hose: ring nut, split ring (Fig. 23) Fig. 23 3. Insert the hose all the way in until it goes no further (Fig. 24) Fig.
- Page 15 Fig. 25 5.6.4 Connection to the skimmer and to the pump. Apply some supplied teflon around the hose connector (hydraulic parts) to guarantee a safe sealing. Position the O-rings on the hosetail (Fig. 26). Fig. 26 1. Pressure connection (Fig. 30, # 1): join the filter pump (outlet Fig. 27, OUT) to the multifunction valve (PUMP), using the corrugated pipes or the rigid connection (Fig.
- Page 16 4. Backwash-tube (Fig. 30, # 4): to be used when we apply the BACKWASH function to drain the dirty water in a discharge area. For the connection use proper rubber tubes and proper hose clamps (hydraulic parts). WASTE WASTE WASTE Fig.
- Page 17 WASTE WASTE WASTE Fig. 31 2. Start the pump and make a BACKWASH of about 2÷3 minutes. 3. Right after this stop the pump and change the multifunctional valve lever position on RINSE. 4. Re-start the pump and rinse for about 30 seconds. 5.
- Page 18 5.8 Demolition and disposal. Collecting recyclable material, both those used for packaging (cardboard, nylon, etc.) and those replaced during routine and extraordinary maintenance is recommended. Suitable collection of waste material for recycling, processing and environmentally compatible disposal contributes in avoiding possible negative effects on the environment and health and promote the reuse and/or recycling of product materials.
- Page 19 Operations and use. Do not use glues, sealers or other chemical products on threads or other parts of the product. 6.1 Description of operation. The product you have purchased carries out the mechanical purification of the water that, passing through the filter media (sand), is cleaned of all undissolved substances held back by the filter media.
- Page 20 User instructions. 7.1 Foreseen use and adjustments. We suggest to start the filter twice a day for 4 or 5 hours. Regularly check if backwash is necessary, please see Tab. 2. 7.1.1 Use and functioning of the multifunctional valve. Always switch off the pump when operating on the multifunctional valve’s lever. It is recommended to install valves in the inlet and outlet pipelines (hydraulic parts).
- Page 21 WASTE WASTE WASTE Fig. 33 Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 21-28...
- Page 22 Routine, scheduled and extraordinary maintenance. Before proceeding with any maintenance activity, remember to disconnect the power plug from the power outlet, and not to put your hands in the water if the product (pump) is turned on. Do not lubricate and/or use detergents and/or chemical products to clean the product. Replace damaged components and/or deteriorated as quickly as possible, use only original spare parts.
- Page 23 Fig. 35 Fig. 34 Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 23-28...
- Page 24 Fig. 36 Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 24-28...
- Page 25 Troubleshooting. ROBLEM AUSE OLUTION OLUTION The product is dirty Clean the product. 1. Low The hydraulic parts are Please consult a Fix the hydraulic parts. flowrate obstructed or bent. skilled from outlet technician. The pump has not been primed Prime the pump. correctly.
- Page 26 10 Retail and spare parts and relevant documentation. See Tab. 5 refer to Fig. 37, Fig. 38, Fig. 39, Fig. 40, Fig. 41. Replace any damaged and/or worn components as quickly as possible; use only original spare parts. SF15 SF25 SF30 SF38 SF45 SF60 SF65 SF85 SF200...
- Page 27 Fig. 39 Fig. 40 Fig. 37 Fig. 41 Fig. 38 Replace any damaged and/or worn components as quickly as possible; use only original spare parts. Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 27-28...
- Page 28 HOTT NTERNATIONAL , 35 IA DELLE EZZE 35013 C (PD) - I ITTADELLA TALY . +39 049-9401150 . +39 049-9409140 info@shott.it MAIL www.shott.it Nome file: 7540028EN - CUSTOMER MANUAL SF15_200 TOP EN.docx Rev. 1 12/06/2017 File name: 28-28...
Need help?
Do you have a question about the SF38 and is the answer not in the manual?
Questions and answers