1. Manuals
  2. Brands
  3. LTS Manuals
  4. Keypad
  5. LTH-M201-KP
  6. Quick start manual

LTS LTH-M201-KP Quick Start Manual

Video intercom keypad module
Hide thumbs Also See for LTH-M201-KP:
Table of Contents

Advertisement

Quick Links

Download this manual
Video Intercom Keypad Module
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LTH-M201-KP and is the answer not in the manual?

Questions and answers

Related Manuals for LTS LTH-M201-KP

Summary of Contents for LTS LTH-M201-KP

  • Page 1 Video Intercom Keypad Module Quick Start Guide...
  • Page 2 Video Intercom Keypad Module·Quick Start Guide Quick Start Guide This quick start guide is intended for users of keypad module(LTH-M201-KP). Keypad module is the component of the module door station. Use it along with the main unit. It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that Product.
  • Page 3 Video Intercom Keypad Module·Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 Video Intercom Keypad Module·Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
  • Page 5 Video Intercom Keypad Module·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
  • Page 6 Video Intercom Keypad Module·Quick Start Guide Cautions  Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). ...

  • Page 7: Table Of Contents

    Video Intercom Keypad Module·Quick Start Guide Table of Contents 1 Overview ...................... 1 2 Terminal and Wiring ..................2 3 Installation ....................3 3.1 Configure Sub Module Address ................3 3.2 One-Module Installation ..................4 3.2.1 One-Module Surface Mounting ................ 4 3.2.2 One-Module Flush Mounting ................

  • Page 8: Overview

    Video Intercom Keypad Module·Quick Start Guide 1 Overview Keypad module support unlock the door via entering password and call the resident via entering room No. Keypad module works automatically after wiring and installation. For detailed installation, please refer to Chapter 3. Its appearance is shown as below: Figure 1-1 Keypad Module Appearance Table 1-1 Appearance Description...

  • Page 9: Terminal And Wiring

    Video Intercom Keypad Module·Quick Start Guide 2 Terminal and Wiring The keypad module’s interfaces and terminals as below: Figure 2-1 Terminals and Interfaces Table 2-1 Descriptions of Terminals and Interfaces Interface Description 485- 485+ Module-connecting Interface (Input) 12V IN 485- 485+ Module-connecting Interface (Output) 12V OUT...

  • Page 10: Installation

    Video Intercom Keypad Module·Quick Start Guide 3 Installation Before you start:  Make sure the device in the package is in good condition and all the assembly parts are included.  Sub module must work along with the main unit. ...

  • Page 11: One-Module Installation

    Video Intercom Keypad Module·Quick Start Guide Figure 3-1 DIP Switch 2. Set the sub module address according to the DIP rules, and install the rubber cover back.  Digit 1, 2, 3, 4 are used to coding the sub module address; Digit 5, 6, 7 are reserved; Digit 8 is a resistance (120Ω) is you set it as on.
  • Page 12 Video Intercom Keypad Module·Quick Start Guide Figure 3-2 Front and Side View  The dimension of one module mounting frame is: 117(L)×107(W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 13 Video Intercom Keypad Module·Quick Start Guide Figure 3-3 Chisel Screw Hole 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts.
  • Page 14 Video Intercom Keypad Module·Quick Start Guide Figure 3-4 Fix the Mounting Frame  The mounting frame should be placed exactly as below for this step. The tamper plate should be at the low-right. 5. Connect the cables to the corresponding interfaces of the main unit and insert it into the frame.

  • Page 15: One-Module Flush Mounting

    Video Intercom Keypad Module·Quick Start Guide Figure 3-5 Insert the Main unit 6. Use the hexagon wrench in the package fix the cover onto the frame. Figure 3-6 Fix the Cover 3.2.2 One-Module Flush Mounting Gang Box...
  • Page 16 Video Intercom Keypad Module·Quick Start Guide Figure 3-7 Front and Side View Figure 3-8 Appearance Description...
  • Page 17 Video Intercom Keypad Module·Quick Start Guide  The dimension of one-module gang box is: 115(L)×134(W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1. Cave the installation hole, and pull the cable out. The suggested dimension of installation hole is 118(L)×108(W)×45.5(D) mm.
  • Page 18 Video Intercom Keypad Module·Quick Start Guide Figure 3-11 Fix the Gang Box 6. Fill and level up the gap between the gang box and wall with concrete. Remove the 4 mounting ears with tool after concrete is dry. Figure 3-12 Remove the Mounting Ears 7.

  • Page 19: Two-Module Installation

    Video Intercom Keypad Module·Quick Start Guide Figure 3-14 Fix the Cover 3.3 Two-Module Installation 3.3.1 Two-Module Surface Mounting Mounting Frame...
  • Page 20 Video Intercom Keypad Module·Quick Start Guide Figure 3-15 Front and Side View  The dimension of two-module mounting frame is: 219(L)×107 (W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 21 Video Intercom Keypad Module·Quick Start Guide Figure 3-16 Chisel Screw Hole 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. Figure 3-17 Fix the Mounting Frame The mounting frame should be placed exactly as below for this step.
  • Page 22 Video Intercom Keypad Module·Quick Start Guide 5. Thread the module-connecting line across the thread hole of the frame. Pass the main unit connecting lines across the thread hole to the upper grid. Figure 3-18 Placement of Lines 6. Connect the cables and module-connecting line to the corresponding interfaces of the main unit, then place the main unit into the upper grid.
  • Page 23 Video Intercom Keypad Module·Quick Start Guide Figure 3-19 Line Connection Effect Picture 7. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid. Figure 3-20 Insert the Modules 8. Use the hexagon wrench in the package fix the cover onto the frame.

  • Page 24: Two-Module Flush Mounting

    Video Intercom Keypad Module·Quick Start Guide Figure 3-21 Fix the Cover 3.3.2 Two-Module Flush Mounting Gang Box Figure 3-22 Front and Side View...
  • Page 25 Video Intercom Keypad Module·Quick Start Guide Figure 3-23 Appearance Description  The dimension of one-module gang box is: 237(L)×134(W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 26 Video Intercom Keypad Module·Quick Start Guide Figure 3-24 Cave the Installation Hole 2. Remove the plastic sheet of the cable entry which will be used. 3. Insert the gang box into the hole and pull out the cables through the cable entry. Mark the screw holes’...
  • Page 27 Video Intercom Keypad Module·Quick Start Guide Figure 3-26 Fix the Gang Box 6. Fill and level up the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-27 Remove the Mounting Ears 7.
  • Page 28 Video Intercom Keypad Module·Quick Start Guide Figure 3-28 Connect Wires and Insert Modules Cable 1 refers to the cables pulled out from the wall that connected to the main unit. Cable 2 refers to the module-connecting line in the accessory package. 8.

  • Page 29: Three-Module Installation

    Video Intercom Keypad Module·Quick Start Guide 3.4 Three-Module Installation 3.4.1 Three-Module Surface Mounting Installation Frame Figure 3-30 Front and Side View  The dimension of two-module mounting frame is: 320.8(L)×107 (W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 30 Video Intercom Keypad Module·Quick Start Guide Figure 3-31 Chisel Screw Hole 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. Figure 3-32 Fix the Mounting Frame The mounting frame should be placed exactly as below for this step.
  • Page 31 Video Intercom Keypad Module·Quick Start Guide 5. Thread the module-connecting lines across the thread holes of the frame. Pass the main unit connecting lines across the thread hole to the top grid.
  • Page 32 Video Intercom Keypad Module·Quick Start Guide Figure 3-33 Placement of Lines 6. Connect the cables and module-connecting line 1 to the corresponding interfaces of the main unit, then place the main unit into the upper grid. Connect the other end of the module-connecting line1 to the input interface of the sub module.
  • Page 33 Video Intercom Keypad Module·Quick Start Guide Figure 3-34 Line Connection Effect Picture 7. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid. Figure 3-35 Insert the Modules...

  • Page 34: Three-Module Flush Mounting

    Video Intercom Keypad Module·Quick Start Guide 8. Use the hexagon wrench in the package fix the cover onto the frame. Figure 3-36 Fix the Cover 3.4.2 Three-Module Flush Mounting Gang Box...
  • Page 35 Video Intercom Keypad Module·Quick Start Guide Figure 3-37 Front and Side View...
  • Page 36 Video Intercom Keypad Module·Quick Start Guide Figure 3-38 Appearance Description  The dimension of one-module gang box is: 338.8(L)×134(W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 37 Video Intercom Keypad Module·Quick Start Guide Figure 3-39 Cave the Installation Hole 2. Remove the plastic sheet of the cable entry which will be used. 3. Insert the gang box into the hole and pull out the cables through the cable entry. Mark the screw holes’...
  • Page 38 Video Intercom Keypad Module·Quick Start Guide Figure 3-41 Fix the Gang Box 6. Fill and level up the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-42 Remove the Mounting Ears 7.
  • Page 39 Video Intercom Keypad Module·Quick Start Guide Figure 3-43 Connect Wires and Insert Modules Cable 1 refers to the cables pulled out from the wall that connected to the main unit. Cable 2 and Cable 3 refer to the module-connecting line in the accessory package. 8.

  • Page 40: More-Than-Three Module Installation

    Video Intercom Keypad Module·Quick Start Guide 3.5 More-than-Three Module Installation 3.5.1 More-than-Three Module Surface Mounting Figure 3-45 Front and Side View  It takes two three-module mounting frames. The dimension of three-module mounting frame is: 320.8(L)×107 (W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 41 Video Intercom Keypad Module·Quick Start Guide The suggested length of cables left outside is 270 mm. 3. Pull out the cable through the cable hole of the left sticker. Figure 3-46 Chisel Screw Hole 4. Remove the stickers and insert the expansion sleeves into the screw holes. 5.
  • Page 42 Video Intercom Keypad Module·Quick Start Guide  Take the 400 mm one for this step.  The green-yellow line in the package is for grounding. 6. Fix the mounting frame onto the wall with 8 expansion bolts. Figure 3-48 Fix the Mounting Frame The mounting frame should be placed exactly as below for this step.
  • Page 43 Video Intercom Keypad Module·Quick Start Guide 7. Pass the main unit connecting lines across the thread hole to the top grid of the left frame. Thread the module-connecting line (190 mm) across the thread hole of the frame. The lines should be placed as below: Figure 3-49 Placement of Lines 8.
  • Page 44 Video Intercom Keypad Module·Quick Start Guide Figure 3-50 Line Connection Effect Picture 9. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid on the left.
  • Page 45 Video Intercom Keypad Module·Quick Start Guide Figure 3-51 Insert the Modules 10. Pull the grounding line out and fixed its two end to the screw on the cover. Figure 3-52 Connect the Grounding Line to the Cover 11. Use the hexagon wrench in the package fix the cover onto the frame.

  • Page 46: More-Than-Three Module Flush Mounting

    Video Intercom Keypad Module·Quick Start Guide Figure 3-53 Fix the Cover 3.5.2 More-than-Three Module Flush Mounting Gang Box...
  • Page 47 Video Intercom Keypad Module·Quick Start Guide Figure 3-54 Front and Side View...
  • Page 48 Video Intercom Keypad Module·Quick Start Guide Figure 3-55 Appearance Description  It takes two three-module gang boxes. The dimension of the gang box is: 338.8(L)× 134 (W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 49 Video Intercom Keypad Module·Quick Start Guide Figure 3-56 Cave the Installation Hole 2. Connect the two gang boxes as the below. Figure 3-57 Cave the Installation Hole 3. Remove the plastic sheet of the cable entry which will be used. 4.
  • Page 50 Video Intercom Keypad Module·Quick Start Guide Figure 3-58 Remove the Plastic Sheets 5. Insert the gang boxes into the hole and pull out the cables through the cable entry. Mark the screw holes’ position with a marker, and take out the gang boxes. Figure 3-59 Mark the Screw Holes 6.
  • Page 51 Video Intercom Keypad Module·Quick Start Guide Figure 3-60 Fix the Gang Boxes 8. Fill and level up the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-61 Remove the Mounting Ears 9.
  • Page 52 Video Intercom Keypad Module·Quick Start Guide Figure 3-62 Place the Grounding Line  The green-yellow line in the package is for grounding. 10. Connect wires and insert the modules. a. Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the Main Unit, then place the Main Unit into the upper grid of the left gang box.
  • Page 53 Video Intercom Keypad Module·Quick Start Guide Figure 3-63 Install Mounting Frames The cables connect to each module shown as below: Figure 3-64 Install Mounting Frames...
  • Page 54 Video Intercom Keypad Module·Quick Start Guide  Cable 2,3,5 and 6 are the module-connecting lines (190 mm) in the package.  Cable 4 is the module-connecting line (400 mm) in the package.  Main unit must be put in the top grid. 11.

  • Page 55: Local Operation

    Video Intercom Keypad Module·Quick Start Guide 4 Local Operation 4.1 Call Resident You can call residents via the keypad module. Steps: 1. Enter the Room No. 2. Press the # key to start calling the resident. (Optional) Press * to hang up the conversation. 4.2 Unlock Door You can unlock the door by inputting password.

This manual is also suitable for:

Lth-m201-cLth-m201-c-2Lth-m201-mcrLth-m201-3sLth-m201-3f

Table of Contents