Advertisement
03.3 Electrical installation
-
To tackle all Safety Information- 01!
-
You can suffer a dangerous electric shock by using a high voltage AC/DC
power supply - by touching the AC/DC power supply wires inside LL ARC SPOT 19!
-
LL ARC SPOT 19 can be operated in two ways:
- 03.3.1 LL ARC SPOT 19 connecting to DC POWER SUPPLY - for switch ON/OFF
luminaries
- 03.3.2 LL ARC SPOT 19 connecting to LL ARC DRIVER - for intensity and colour
control
03.3.1 Connecting to DC power supply
(Figure Nr. 2.1)
-
LL ARC SPOT 19 must be connected to the device- MW power supply In:100-260AC/
Out: 24V
-
It is not necessary to open fixture before connecting to MW power supply.
AC Power Supply Cord plug connections to MW Power Supply:
Symbol
Pin
Wire Colour
L
live
brown
N
neutral
blue
ground (earth)
yellow/green
03.3.2 Connecting to LL ARC DRIvER
(Figure Nr. 2.2)
-
For intensity and colour control is necessary connection with LL ARC DRIVER.
-
It is not necessary to open fixture before connecting to LL ARC DRIVER.
-
Before installing of LL ARC DRIVER carefully read USER MANUAL for LL ARC DRIVER.
04 MAINTENANCE
-
To tackle all Safety Information- 01!
-
Damage caused by inadequate cleaning or maintenance is not coverd by
warranty.
-
Regular cleaning is demand (dust, dirt, ...).
Maintenance policy:
-
Unplug mains before maintenance and at least 10 minutes cool off
-
Appliance do not illegal open or demount
-
Clean-up dust only from outer surface (for ex. diffuser).
-
Use vacuum or dumpy duster (warm water)
-
Before reinstalling to check failure-free state – no wet parts!
Order code
Product name
LL31 700
LL ARC SPOT 19 RECESSED RGB
LL ARC SPOT RECESSED connecting to DIN POWER SUPPLY
Screw (US)
yellow or brass
silver
Connecting LL ARC SPOT to DIN POWER SUPPLY
green
enables to switch ON/OFF luminaries.
LL ARC SPOT RECESSED connecting to ARC DRIvER and DIN POWER SUPPLY
Connecting LL ARC SPOT to PWM DRIVER and DIN POWER SUPPLY enables to switch
I
(A)
ON/OFF luminaries and in addition intensity and colour control by DMX controller.
C
3x0,35A
POWER
SUPPLY
MW 240
DIN 24V
DC 24v
max. 10A
100-260v AC
red
green
blue
black
RGB
connect max. 1,4A per GROUP
max. 16A
2.1
DMX
CONTR.
DC 24v
POWER
max. 10A!
SUPPLY
MW 240
DIN 24V
100-260v AC
2.2
If you have any question please, contact support@leaderlight.sk
Advertisement
