Hdmi over ip encoder & decoder transceiver (12 pages)
Summary of Contents for SIIG CE-H20411-S1
Page 1
HDMI over CAT5e Transceiver Quick Installation Guide Introducing the HDMI over CAT5e Transceiver The HDMI over CAT5e Transceiver provides a cost effective solution by which high definition video and high quality audio can be transmitted to mulitiple locations over long distances using inexpensive CAT5e/6 cables.
Page 2
Layout Connection Rotary Switch Rear Panel • Connection LED: this LED will be lit when proper RJ-45 In is established with another transmitter/transceiver • Rotary Switch: adjust the 16-level equalization switch according to the transmission distance of the received HDMI signal. For 5.1ch/7.1ch audio output, adjust from 0-to-7 (longest-to-shortest transmission length).
Hardware Installation Please read and follow the safety guidelines to protect yourself from possible injury and to minimize the risk of damage to your equipment. • Do not attempt to service the unit yourself. • Provide proper ventilation and air circulation, do not use near water •...
Page 4
Speakers HDMI display Speakers Figure 2: Cascading Transceivers Transceiver CAT5e cable (up to 200ft) Transceiver CAT5e cable to Transceiver or Display...
Page 7
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product.
Page 8
Fremont, CA 94538-3152, USA Ph: 510-657-8688 HDMI over CAT5e Transceiver is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.
Need help?
Do you have a question about the CE-H20411-S1 and is the answer not in the manual?
Questions and answers