In-Wall Installation
q
Use the elbow. Attach the elbow to
the end of the hose and insert end
of hose into wall drain.
q
Use a strap or cable tie to hold
hose in place.
Drainage into a siphon
q
Secure the connection point with a
hose clip(not included in
factory-supplied equipment).
Drainage into a sink
CAUTION
Ensure that the plug is not in the
drain hole.
q
Attach water drain hose securely
to sink.
q
Use a strap or cable tie to hold
hose in place.
q
When the water is being drained,
check that the water flow out of
the sink is adequate.
10
All manuals and user guides at all-guides.com
Transport, such as when
moving out
Before transporting the washing
machine:
-
Turn off the water.
-
Disconnect the washing machine
from the power outlet.
-
Dismantle the supply and drainage
hoses.
-
Install the transport bolts.
i
Having transported the appliance
and ensured proper installation
and connection, allow the Drain
program to run through before
starting the first wash program.
Preparing and inserting the
transport bolts
q
Remove the covers.
q
Prepare the transport bolts:
Loosen the screw in the sleeve
until the end of the screw is level
with the end of the sleeve.
q
Insert and tighten all transport
bolts. Make sure that the tab on
the transportation bolt is inserted
in the slot on the washing machine
back panel.