VTech Toot-Toot Drivers Fire Station Instruction Manual page 10

ASSEMBLY INSTRUCTIONS
With the Toot-Toot Drivers
To ensure your child's safety, adult assembly is required.
1. Assemble the door, door floor and wall components. Following the
steps below:
A. Snap the two door fronts to the door floor. The side with a 1 on
the back should be inserted on the left of the door floor. Insert the
side with a 2 on the back into the right of the door floor, as shown
below. Then Insert the door into the two grooves in the base as
shown.
1
B. Fix the door top onto the two door fronts, as shown below.
Attach the back wall of the door building using the tabs on the door
floor and door top. You will hear a clicking sound when they are
correctly attached.
Fire Station, safety comes first.
®
2
9