Samsung WW6 J4 Series User Manual page 54

Troubleshooting
Code
3C
UC
HC
1C
AC
0
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
54 English
Untitled-4 54
Check the motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service centre.
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a customer service centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service centre.
High temperature heating check.
• If the information code remains, contact a customer service centre.
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service centre.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service centre.
The machine does not turn off automatically after the last spinning
process, and the "0" message remains.
• The machine operates normally without running the
DRUM CLEAN cycle. However, it is recommended to run the
cycle for hygienic purposes.
Action
2020-08-20 11:30:07