Advertisement
Quick Links
Baxter
Baxter Arched Range Hood
Baxter Arched Range Hood
Arched Range Hood
• Always read the instructions completely and carefully before beginning assembly.
• Remove and check contents for damage and/or missing parts. Keep the original
cartons and packing materials, which are required for any authorized adjustment by
our dealers.
• These instructions are for reference only. Make sure installation procedures comply
with all applicable building codes in your area.
Parts List
1 ea.- Hardware Pack
Important Notes
1 ea.- Mounting Board
2 ea.- Mounting Brackets
1 ea.- Range Hood Liner
1 ea.- Range Hood
10-0570-1
1 ea.- Shelf
Form OME-087, 09/2012
©Omega National Products
Advertisement
Summary of Contents for Omega National Products Baxter Arched
- Page 1 Baxter Arched Range Hood Baxter Arched Range Hood Baxter Arched Range Hood Important Notes • Always read the instructions completely and carefully before beginning assembly. • Remove and check contents for damage and/or missing parts. Keep the original cartons and packing materials, which are required for any authorized adjustment by our dealers.
- Page 2 Step 4: Start 6 each 10-24 x 3/4” screws into the “T” Figure 4 nuts that were previously installed (See figure Form OME-087, 09/2012 10-0570-2 ©Omega National Products...
- Page 3 Step 5: Insert the Omega National Products Blower (sold Separately) into the liner from below. Figure 5 Using the 4 holes in the side of the blower attach to the liner with 4 each 8-32 x 1/2” screws and square nuts (See figure 5).
- Page 4 Hood at this time using 4 each #8 x 1/2” pan head screws (See figure 11). #8 x 1/2" Pan Head Screws 1010 Rowe St. Elkhart, IN 46516 (574) 295-5353 Fax (800) 367-3329 Form OME-087, 09/2012 www.omeganationalproducts.com 10-0570-4 ©Omega National Products...