Advertisement
URIMAT Champion-Pro Hand Dryer
High-speed hand dryer in a stainless steel housing with HEPA filter,
Touch-free usage thanks to LED induction, particularly suitable for a space-saving assembly.
Installation Manual:
Item description:
Article-Nr.
Height:
Width:
Depth:
Motor power:
Motor:
Noise level:
Weight:
37.508 Brushed
37.509 White
37.957 HEPA filter
312mm
302mm
172mm
1200 - 1450W
Brushmotor
70 dB @ 1m
4.1 Kg
08.06.2023/mr/Rev.03
Advertisement
Table of Contents
Related Manuals for URIMAT Champion-Pro
Summary of Contents for URIMAT Champion-Pro
- Page 1 URIMAT Champion-Pro Hand Dryer Installation Manual: High-speed hand dryer in a stainless steel housing with HEPA filter, Touch-free usage thanks to LED induction, particularly suitable for a space-saving assembly. Item description: Article-Nr. 37.508 Brushed 37.509 White 37.957 HEPA filter Height:...
-
Page 2: Electrical Diagram
Precaution before installation and Installation location Nicht an den folgenden Orten installieren (andernfalls kann es zu Fehlfunktionen kommen) Do not install in the following locations (Otherwise it may cause malfunction) Ort mit Temperaturen unter - 10 ° oder 40 ° Place with temperatures below - 10 °... -
Page 3: Power Connection
Install method Power Connection Power supply line (ground lead) When installing the dryer without connecting box, install above the right side of the dryer, a two-hole standard socket corresponds to that of a hand dryer. The distance should be 20-50 cm. Please install the junction box at the installation site without cover lid, if a direct connection of the (The relative height is 170 cm. - Page 4 Installation is recommended for additional protection a residual current device (RCD) with a nominal residual current of no more than 30mA in the circuit supplying the bathroom. Ask your installer for advice. Environmental Protection. Electronic devices must not be disposed of with household waste. Please recycle where facilities exist.
-
Page 5: Daily Use And Maintenance
Daily use and maintenance External maintenance Wipe with a dry soft cloth or towel. Please use a neutral detergent. Please do not use organic solvents, or alkaline toilet cleaners, cleaning brushes, etc. Otherwise there may be discoloration on the surface finish of the device. If you use a chemical wipe, Sensing be careful. -
Page 6: Specification
Specification Model 37.508 Champion Pro Model 2900/2901/2902/2903 Unit size 312x302x172mm 312x302x172mm Netto Weight 4.1kg 4.1kg Brush motor Voltage AC 220-240 V Motor AC220-240V~ Singel-phase Sensing distance Phase 15-20cm Input 1200-1450 W IPX1 Protection class 1200-1450W 650 -750 W Air Speed 75 m/S Heating Power 70m s...
Need help?
Do you have a question about the Champion-Pro and is the answer not in the manual?
Questions and answers