Specifications - TP-Link Archer C5 Pro Manual

Ac1350 wireless dual band gigabit router
Table of Contents

Advertisement

Specifications

Hardware
· Ethernet Ports:
4*10/100/1000Mbps LAN Ports, 1*10/100/1000Mbps WAN Port
· Buttons:
Reset Button, Power On/Off Button, WPS/Wi-Fi On/Off Button
· Antennas:
4 Fixed Omni Directional Antennas
· External Power Supply:
12V/1A
· Dimensions (W x D x H):
9.1 × 5.7 × 1.4 in (230 × 144 × 35 mm)
Wireless
· Wireless Standards:
IEEE 802.11ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz
· Frequency:
2.4GHz and 5GHz
· Signal Rate:
5GHz: Up to 867Mbps
2.4GHz: Up to 450Mbps
· Wireless Function:
Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Schedule,
Wireless Statistics, AP mode
· Mesh Technology:
WFA EasyMesh
· Wireless Security:
64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
Software
· WAN Type:
Multi- EWAN, Dynamic IP, Static IP, PPPoE, PPTP, L2TP
· DHCP:
Server, DHCP Client List, Address Reservation
· Port Forwarding:
Virtual Server, Port Triggering, UPnP, DMZ
· VPN Passthrough:
PPTP, L2TP, IPSec
· VPN Server:
PPTP, OpenVPN
· Dynamic DNS:
DynDns, NO-IP
· Access Control:
Parental Control, Local Management Control, Host List, White List,
Black List
· Firewall Security:
DoS, SPI Firewall, IP and MAC Address Binding
· Protocols:
IPv4, IPv6
· Management:
Access Control, Local Management, Remote Management, TR-069,
TR-098, TR181, TR-111, TR143
· APP Management:
Tether
TP-Link AC1350 Wireless Dual Band Gigabit Router Archer C5 Pro

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Archer C5 Pro and is the answer not in the manual?

Questions and answers

ника
March 19, 2025

как узнать пароль если на роутере не понятно где он

User image 67daac217039a
1 comments:
Mr. Anderson
March 19, 2025

If the router asks for a password that you don't know, it means it has already been configured. To reset it to factory settings, press the reset button on the router for 5 to 10 seconds until the indicators blink. This button is usually inside the router case and must be pressed with a thin object. After the router reboots, the settings will be reset to factory defaults, allowing you to access the configuration panel again.

This answer is automatically generated

Table of Contents