Philips D Line 65BDL4550D User Manual page 30

65BDL4550D_75BDL4550D_86BDL4550D
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
Setup
3. Press [ ] HOME button on the remote control, then select .
Connect to network
4. Select , then press [ ] button.
5. Wait until this display finds the network connection.
6. If the "End User License Agreement" window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
18