Wash Cycles; Options And Extra Functions - LG DFC612 Series Owner's Manual

OPERATION
26
• The drain pump activates and the cycle cancels. Once the appliance finishes draining, the power
turns off.
• Press and hold START button for 3 seconds to activate the cancel function.
START
e
• To operate the appliance, either (depending on display type) press START button and close the door
or close the door and press START button.
• If START button is not pressed to start the cycle within 4 minutes, the power will automatically turn
off.

Wash Cycles

Selecting the Cycle
The default cycle is Eco. You can also customize
these settings using the Cycles button.
• Press the Cycles button repeatedly to select the
Auto, Turbo, or Intensive cycle.
Auto
This cycle senses the soil amount and water clarity
and optimizes the wash to achieve the best
cleaning. The wash time may vary depending on
the soil level.
Intensive
This cycle is for heavily soiled dishes and dishes
with hardened on soil. This cycle defaults to the
strongest spray intensity and uses it to wash
heavily soiled dishes.
Eco
It provides the most efficient energy and water
consumption for a good washing result and drying
result on a normally soiled load and as it uses very
little energy.
Turbo
This cycle will clean moderately soiled dishes using
slightly more energy and water.
• Extra Dry is set to on as default. If you do not
want to dry dishes after washing, turn off the
Extra Dry option. Not drying the dishes will
result in a shorter cycle time.
Machine Clean
This cycle is for cleaning the inside of the appliance.
Use the cycle without dishes in the appliance. It
eliminates residual soils, odor, white spots,
limescale, and other dirt. Add citric acid or another
cleaning agent for more effective results.
Options and Extra
Functions
Select the desired cycle button and then select the
options for that cycle. For more information, see
the Cycle/Option Guide section.
Half Load
This option washes intensively by selecting the
upper or lower racks. For small loads, use just the
upper or lower rack to save energy and time. By
pressing the Half Load button, the settings
(Upper), (Lower) and the cancellation of the this
v
option are available.
High Temp.
Raises the main wash or heating rinse temperature
to improve cleaning.
• A chime will sound to alert you of any residual
temperatures inside the appliance. Wait for the
N