Related Manuals for StartingLine SLG-620
Summary of Contents for StartingLine SLG-620
- Page 1 SB-E-2-854 ISS.01 OPERATION MANUAL SLG-620 GRAVITY FEED SPRAYGUN ATTENTION! READ THIS MANUAL BEFORE ATTACHING THE AIR HOSE...
- Page 2 SAFETY WARNINGS Fire and explosion Solvents and coating materials can be highly flammable or combustible when sprayed. ALWAYS refer to the coating material supplier’s instructions and COSHH sheets before using this equipment. Users must comply with all local and national codes of practice and insurance company requirements governing ventilation, fire precautions, operation and house-keeping of working areas.
- Page 3 ATTENTION! READ BEFORE ATTACHING THE AIR HOSE SET-UP AND ADJUSTMENT INSTRUCTIONS 1. Attach Cup to Gun and flush through with cleaning 5. Spray test and adjust air pressure, fan size and fluid flow as required. Recommended spray distance 6 – solvent to remove oils.
- Page 4 3. To clean air cap and fluid tip, brush exterior with a 4. To clean fluid passages, remove excess material stiff bristle brush. If necessary to clean cap holes, at source, then flush with a suitable solvent. Wipe use a broom straw or toothpick if possible. If a wire gun exterior with a solvent dampened cloth.
Need help?
Do you have a question about the SLG-620 and is the answer not in the manual?
Questions and answers