Advertisement
EN
SB-E-2-840 ISS.02
Operation MANUAL
SLG-P500 PRESSURE FEED SPRAYGUN
ATTENTION!
READ THIS MANUAL BEFORE ATTACHING THE AIR OR FLUID HOSE
Advertisement
Table of Contents
Related Manuals for StartingLine SLG-P500
Summary of Contents for StartingLine SLG-P500
- Page 1 SB-E-2-840 ISS.02 OPERATION MANUAL SLG-P500 PRESSURE FEED SPRAYGUN ATTENTION! READ THIS MANUAL BEFORE ATTACHING THE AIR OR FLUID HOSE...
- Page 2 The following hazards may occur during the normal use of this equipment. Please read the following chart. HAZARD CAUSE SAFEGUARDS Fire Solvent and coatings can be highly flammable Adequate exhaust must be provided to keep air free of or combustible especially when sprayed. accumulations of flammable vapours.
- Page 3 ATTENTION! READ BEFORE ATTACHING THE AIR OR FLUID HOSE SET-UP AND ADJUSTMENT INSTRUCTIONS hose. Recommended air pressure 45psi (3.0 bar). 5. Set Fluid pressure 5—10 psi depending on type of 1. Attach Fluid Hose to Gun and flush through with coating material.
- Page 4 2. Make sure the baffle and retaining ring threads are CLEANING clean and free of foreign matter. Before assembling 1. For routine cleaning, it is not necessary to remove retaining ring to baffle, clean the threads thoroughly, then add two drops of SSL-10 spray cup from gun.
Need help?
Do you have a question about the SLG-P500 and is the answer not in the manual?
Questions and answers