Advertisement
Product Features
Operation
Viewing charge level
Press the switch button to check the capacity of PCAJS200.
| Indicator lights | Not lit | 5 flashing | 1 solid | 2 solid | 3 solid | 4 solid | 5 solid |
| Battery capacity | 0% | 10% | 20% | 40% | 60% | 80% | 100% |
The indicator lights will flash one by one during charging period. Refer to the chart above for the indicator status. All indicator lights will turn off when charging is paused or complete.
Charging unit
- Plug the home adaptor into the universal socket.
![]()
- Connect 12V 1A input port of PCAJS200 to the other end of home adaptor.
-Or-
- Plug the car adaptor into the socket of cigarette lighter.
- Connect 12V 1A input port of PCAJS200 to the other end of car adaptor.
![]()
Jump starting 12V vehicle
- Make sure that the number of indicator light is not less than 3.
- Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery terminal and connect the black battery clamp of jumper cable to the vehicle's negative (-) battery terminal.
- Plug the cord of jumper cable into the jump start socket.
- Start the vehicle.
- When the vehicle starts, remove the jumper cable from the unit and disconnect red and black clamps to the vehicle battery terminals within 30 seconds.
- Leave the vehicle's engine running.
![Jump starting 12V vehicle]( "Quipall - PCAJS200 - Jump starting 12V vehicle")
Charging mobile phones or tablets
- Plug the switch cable B to USB 5V 2A output port.
- Select appropriate connector and connect it to your mobile phones or tablet.
- Press the switch button to charge.
![Charging mobile phones or tablets]( "Quipall - PCAJS200 - Charging mobile phones or tablets")
Charging 19V Notebook
- Plug the switch cable A to USB 19V 3.5A output port.
- Select appropriate connector for your Notebook and connect it to the switch cable A and your Notebook.
- Press the switch button to charge/power supply.
![Charging 19V Notebook]( "Quipall - PCAJS200 - Charging 19V Notebook")
Powering 12V DC vehicle products or 12V electronics
- Plug the optional switch cable to 12V 10A output port.
- Connect the optional switch cable and 12V vehicle product or 12V electronics.
- Press the switch button to power supply.
Using the LED Flashlight
- Press the switch button 3 seconds to start the LED light.
- Press the button slightly to activate the 4 models of LED light: (Normal / Strobe / SOS / Off)
Frequently Asked Questions
Q. How do I turn off this appliance?
A. This unit will power off automatically when there is no load or charging is complete.
Q. How many times can this unit charge my cell phone?
A. Approx. 7 times at least for iPhone4.
Q. How long will this unit take to fully charge my cell phone?
A. Approx. 1 hour.
Q. How long will this unit, fully charged, power a Notebook?
A. 2-3 hours.
Q. How many times can this unit, fully charged, jump start a vehicle?
A. Approx. 20 times.
Q. How long will the battery remain charged?
A. 6-12 months, however, we suggest to recharge it every 3 months.
TROUBLE SHOOTING
| Symptom | Cause | Remedy |
| No response when pressing the switch button. | Low voltage protection has been activated | Plug the adaptor into the 12V 1A input port to activate. |
| Unit is a bit hot when charging a Notebook. | The charging current is higher (3.5A) | Remove the battery of your notebook and use PCAJS200 to supply power directly, or disconnect unit from your notebook wait until it's cool down to reconnect them. |
TOXIC AND HARMFUL SUBSTANCES:
| Composition and amount of toxic and harmful substances in PCAJS200 | |||||
| Pb | Hg | Cd | Cr(Vi) | PBB | PBDE |
| O | O | O | O | O | O |
| O: Indicate all homogeneous materials' hazardous substances content are below the MCV limit specified in the Standard 2002/95/EC (RoHs). | |||||
TECHNICAL SPECIFICATIONS
| Dimensions | 6.3in x 3in. x 1.1in |
| Weight | 0.9lbs |
| Battery Capacity | 44.4Wh |
| Output | 5V  2A; 12V10A; 19V 3.5A; |
| Input | 12V1A |
| Charging time | 4 hours |
| Starting Amps | 200A |
| Peak Amps | 400A |
| Operating temperature | -20˚C-60˚C/-4˚F - 140˚F |
PARTS LIST
| # | Description | Quantity |
| 1 | Main unit | 1 |
| 2 | Switch cable A | 1 |
| 3 | Switch cable B | 1 |
| 4 | Cell phone/Tablet connector | 8 |
| 5 | Notebook connectors | 8 |
| 6 | AC Home adaptor | 1 |
| 7 | DC Car adaptor | 1 |
| 8 | Jumper cable with battery clamps | 1 |
| 9 | User Manual | 1 |
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the PCAJS200 that isn't answered in the manual? Leave your question here.