VIDEO control keys:
6
1. Power:When you push this button, it will turn ON or OFF the LCD
power.
2. V1:Video input 1. When you push this button, it will show the picture
from the source unit connected to video input 1.
3. V2:Video input 2. When you push this button, it will show the picture
from the source unit connected to video input 2.
4. MENU/SELECT : When you press this key, a menu will appear. Use the +
and – keys to highlight menu selections. When the desired selection is
highlighted, press the MENU/SELECT button again to change to that
selection.
┼
:When you push this button, you will move up in a menu, or
5.
increase the value of the setting you have selected.
–
:When you push this button, you will move down in a menu, or
6.
decrease the value of the setting you have selected.
3. Operation
5
4
3
8
2
1