Using Your Monitor - Rosen Car Show CS104LCD User Manual

USING YOUR MONITOR

Do not press directly on the LCD screen.
=
Do not apply any liquid directly on the LCD screen
=
to clean. If you need to clean the LCD screen
use an approved LCD cleaning cloth.
Do not add any parts or use any accessories
=
which are not provided by Rosen.
Do not use or store in the temperatures exceeding:
=
(Operating 0~50℃/32~122
Be careful when moving the monitor so as not to
=
damage the LCD screen.
INSTALLATION
Connect power (+) to ACC, instead of ACC/Start.
=
If you connect the power to ACC/Start the monitor
might shutdown during vehicle start-up. If the
monitor shuts down due to this reason, please
re-start the car.
Make sure to use the correct screws for mounting
=
the mounting bracket to the vehicles roof beam
and when connecting the monitor to the mounting
bracket. The following screws are provided with
this monitor:
Mounting Bracket to Roof Support Beam: M4×0.7x6
Monitor to Mounting Bracket:
6. Precautions
o
F, Storage 0~60℃/32~140
10
M4×¼ "x8
o
F)