Nokia RM-387 User Manual page 42

RM387_0.3_080403_clean_fcc.fm Page 42 Wednesday, April 30, 2008 12:38 PM
Secondary camera
1. To activate the secondary camera in the standby mode, keep the lens cover
closed, and select > Applications
activated, select Options
2. To zoom in or out, scroll up or down.
3. To take a picture, press the scroll key.
Active toolbar
The active toolbar provides you with shortcuts to different items and settings
before capturing an image or recording a video. Scroll to icons, and select them by
pressing the scroll key.
If you want the active toolbar to be visible before and after capturing an image or
recording a video, select Options
for 5 seconds when pressing the scroll key, select
In the active toolbar, select from the following:
Switch to video mode (
video and image modes
Scene modes — to select the scene
Flash mode — to select the flash mode (images only)
Keep a safe distance when using the flash. Do not use the flash on people or animals at close
range. Do not cover the flash while taking a picture.
Self timer — to activate the self-timer (main camera only). Select the
self-timer delay, and to activate the self-timer, select Activate.
Sequence mode — to activate the sequence mode (images only). See Capture
images in sequence p. 43.
Go to Gallery — to open the Gallery
To customise the toolbar, select
item from the toolbar, or change, add, or move items.
The available options vary depending on the capture mode and view you are in.
The setup settings return to the default settings when you close the camera.
If you select a new scene, the colour and lighting settings are replaced by the
selected scene. See Scenes p. 44. You can change the setup settings after
selecting a scene if needed.
> Camera. If you have the main camera
> Use secondary camera.
> Show toolbar. To view the active toolbar only
Options
Switch to image mode) — to switch between the
Options > Customise toolbar. You can remove an
> Hide toolbar.
42