Subscribe to Our Youtube Channel
Related Manuals for Powermat PM-KPU-4800M
Summary of Contents for Powermat PM-KPU-4800M
- Page 1 PM0804 USER MANUAL PLACE IMAGE HERE PNEUMATIC IMPACT WRENCH PM-KPU-4800M ORIGINAL MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS ..................................2 WARNING / INFORMATION SYMBOLS ........................3 PURPOSE OF THE DEVICE ............................4 TECHNICAL DATA................................4 SAFETY RULES..............................5 General safety instructions ................................5 Hazards related to parts thrown out .......... -
Page 3: Warning / Information Symbols
WARNING / INFORMATION SYMBOLS ATTENTION: Before using the device, carefully read the instruction manual and safety recommendations. Keep the instructions. ATTENTION: Use protective headphones. ATTENTION: Use safety glasses. ATTENTION: The use of a dust mask is recommended ATTENTION: Use protective gloves. ATTENTION: The use of protective clothing is recommended. -
Page 4: Purpose Of The Device
Persons who have not read this manual, please read it carefully before using the device for the first time. TECHNICAL DATA Model PM-KPU-4800M No-load rotation 4500 / min Maximum torque 4800Nm Driver size 1 "... -
Page 5: Safety Rules
SAFETY RULES ABOUT GENERAL SAFETY INSTRUCTIONS Before you start working with this device, familiarize yourself with all the controls. Practice handling the device and ask a professional to explain its functions, operation and techniques. Make sure that in the event of a failure you can turn off the device immediately. Improper use of the device can lead to serious injuries. -
Page 6: Work-Related Hazards
WITH HAZARDS RELATED TO WORK Using the tool may expose operator's hands to hazards such as crushing, impact, cutting, abrasion and heat. Wear appropriate gloves to protect your hands. The operator and maintenance personnel should be physically capable of handling the quantity, weight and power of the tool. -
Page 7: Noise Hazard
the effect of dust created with the tool and the possibility of disturbing the dust that exists. The air outlet should be directed to minimize the induction of dust in a dusty environment. Where dust or fumes are generated, priority should be given to controlling them at the source of the emission. -
Page 8: Construction Of The Device
Never carry the tool by the hose. CONSTRUCTION OF THE DEVICE MODEL: PM-KPU-4800M... -
Page 9: How To Use The Device
MAINTENANCE OF THE DEVICE CONDITIONS OF USE Make sure that the compressed air source is capable of generating the correct operating pressure and that the required air flow is ensured. If the supply air pressure is too high, a reducer with a safety valve should be used. The air tool should be fed through the filter and lubricator system. -
Page 10: Maintenance And Repair
to the pneumatic system. Put the wrench with the cap mounted on the unscrewed or tightened element. Squeeze the trigger of the tool gradually. After finishing work, disassemble the pneumatic system and preserve the tool. MAINTENANCE AND REPAIR Work not described in this manual should be performed by an authorized customer service point. Use only original parts. -
Page 11: Troubleshooting
TROUBLESHOOTING Let a small amount of WD-40 through the air inlet hole. Run the tool for a few seconds. The blades may be sticking to the impeller. Run the tool for approximately 30 seconds. Lubricate Tool is running too slowly the tool with a little oil. -
Page 12: Service
Repair of power tools should be performed only by qualified personnel using original spare parts. This ensures the safe use of the device. Address: Powermat service ul. Obrońców Poczty Gdańskiej 97 42-400 Zawiercie Tel. 32 670 39 68, internal 4... -
Page 13: Manufacturer's Data
You can also take the old equipment back to the collection point. More information on the collection points for used devices is available at the website: https://sklep.powermat.pl/webpage/pl/recycling.html MANUFACTURER'S DATA PH Powermat TMK Bijak Sp. Jawna Ul. Obrońców Poczty Gdańskiej 97 42-400 Zawiercie https://www.powermat.pl... -
Page 14: Part Diagram
PART DIAGRAM IDOK EXPLODED DECLARATION OF CONFORMITY...
Need help?
Do you have a question about the PM-KPU-4800M and is the answer not in the manual?
Questions and answers