Table of Contents
Advertisement
2.
Press the minutes.
3.
Use or to select the minutes.
4.
Press
to confirm the time.
Setting the date
1.
Use or to select the year.
2.
Press the month.
3.
Use or to select the month.
4.
Press the day.
5.
Use or to select the day.
6.
Press
to confirm the date.
7.
Press "OK" to end the initial start-up.
8.
Open and close the appliance door once.
a The appliance will perform a self-test, after which it
will be ready to use.
a The initial start-up is now complete.
7.2 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
8 Basic operation
8.1 Switching on the appliance
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press
to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
display shows the main menu or another function
when the appliance is switched on.
→ "Basic settings", Page 16
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
8.2 Switching off the appliance
▶
Press
to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→ "Residual heat indicator", Page 11
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→ "Cooling fan", Page 7
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press
to switch the appliance on.
→ "Switching on the appliance", Page 11
4.
Set the required type of heating and temperature for
the heat-up process and press
→ "Setting the type of heating and temperature",
Page 11
Heating up
Type of heating
Temperature
Cooking time
5.
Ventilate the kitchen while the appliance is heating.
6.
Press
to switch off the appliance after 1 hour.
→ "Switching off the appliance", Page 11
7.
Allow the appliance to cool down.
8.
Clean the smooth surfaces with soapy water and a
dish cloth.
9.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
8.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display
Residual heat high
Residual heat low
8.4 Setting the type of heating and
temperature
1.
Press
to switch the appliance on.
2.
Press "Types of heating".
3.
Scroll through the types of heating using or .
4.
Press the type of heating that you want to use.
5.
Press "Temperature".
6.
Use or to select the temperature.
7.
Press
to confirm the setting.
Also available to select:
– Rapid heating → Page 15
– Cooking time → Page 13
– Ready at → Page 13
– Information → Page 12
8.
Press
to start the operation.
Note: When you are preheating the appliance, the
optimal time to place your food in the cooking com-
partment is as soon as the heat-up indicator is filled.
a The cooking time appears on the display.
a The heat-up indicator bar visualises the rising tem-
perature.
9.
When the food is ready, use
ance off.
Basic operation en
to start.
Circo Therm hot air
Maximum
1 hour
Temperature
Over 120 °C
Between 60 and 120 °C
to switch the appli-
11
Advertisement
Table of Contents
