Olivetti d-COLOR P2226 Operation Manual page 169

User Authentication and Accounting (User Login, Job Accounting) > Administrator settings
2
Configure the settings.
The setting items are as follows.
Item
Change ID
Change Password
You can use this to set the administrator ID. The factory default settings
for the administrator ID is set as shown below.
Model Name
d-COLOR P2226/d-COLOR P2226 plus
Select the [▲] or [▼] key to increase or decrease, respectively, the value
at the blinking cursor. Enter the specified ID. Select the [◄] and [►] key
to move the cursor right and left. Enter an ID consisting of between 1 and
16 numbers.
You can use this to set the administrator password. The factory default
settings for the administrator password is set as shown below.
Model Name
d-COLOR P2226/d-COLOR P2226 plus
Select the [▲] or [▼] key to increase or decrease, respectively, the value
at the blinking cursor. Enter the password to be changed. Select the [◄]
and [►] key to move the cursor right and left. Enter a password
consisting of between 0 and 16 numbers.
NOTE
The administrator password is not displayed.
7-23
Descriptions
Administrator ID
2600
Administrator
Password
2600