Advertisement
*Registration and setup can continue while charging—charging may take up to 5 hours.
**For non-Wi- Fi USB setup, see end of Guide. †Full setup may take 20 minutes or longer depending on Wi-Fi speed.
Control your child's play with these interactive LEAPPAD Ultimate tablet features:
Access to Parent Settings is protected by a 4-digit parent lock code that must be established during initial setup. Parent Settings can be accessed from the Sign-In screen by pressing the Parent Settings icon to log in with your parent lock. Alternatively, you can log in via the Settings icon on the Home Bar of the child's Home Screen.
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com Parent Account you created during device setup and registration. If you need to reset your parent lock, you can do it from the device or reference the FAQ section at leapfrog.com/support/leappadultimate for more information.
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity, troubleshooting suggestions are available at leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet locations. Take care not to spill food or any kind of liquid on this product as it may render it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the product in your car as the temperatures in parked cars can exceed the acceptable storage temperature. Exposure to extreme temperatures can result in shortened battery life or cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign objects or paint the product. Clean your hands before handling the product if they have been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Please read all the Important Safety Instructions prior to using LEAPPAD™ Ultimate. Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage to LeapPad Ultimate tablet or other property.
Never use the tablet while riding a bicycle or operating mechanical games or machinery.
PROTECT YOUR BODY. ERGONOMIC CONSIDERATIONS:
When using a tablet device, it is possible that repetition of certain motions or remaining in certain positions over for long periods of time may cause discomfort in the hands, neck, shoulders, or other parts of the body. Reduce risk of discomfort and repetitive motion injuries by using the tablet in a comfortable position and taking a 10 to 15 minute break every hour. If you experience any injury or ongoing discomfort, stop use and see a physician.
Keep the device at least 6" (15cm) away from pacemakers and other similar medical devices that may be sensitive to devices that contain magnets and emit electromagnetic fields.
ACCESSORIES: Please read all safety instructions for any accessories or other products before using with the LEAPPAD™ Ultimate tablet. LeapFrog is not responsible for the operation of third-party accessories or their compliance with safety and regulatory standards.
Routinely check this toy for proper and safe condition. If there is any damage or broken parts, remove toy from use.
The AC Adapter or USB cords could be a strangulation hazard. Not for children under 3 years.
If for any reason the screen (display) is fractured or cracked, immediately remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume, may result in permanent hearing loss. When using headphones or ear buds, it is recommended that the product is listened to at lower volumes for shorter periods of time. Set the volume while in a quiet environment; turn the volume down if you cannot hear people speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The louder the volume, the less time required before your hearing may be affected. If you experience ringing in your ears or hear muffled speech, stop listening and have your hearing checked.
Note: Maximum output voltage ≤ 150mV
It is rare but possible for seizures to be triggered by light flashes or patterns. Play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
The lithium rechargeable battery cannot be removed from the product. For your safety, never try to remove the battery. For power or battery issues, please contact LeapFrog customer support. Contact information for your local support is available at leapfrog.com/support
The LeapPad Ultimate tablet is equipped with a rechargeable lithium-polymer battery. It will require about 5 hours of charging using the included AC power adapter prior to first use. Attempting to charge via connection to the computer will take much longer.
The battery is only to be charged by adults or children 8+ years of age under the full supervision of parents. You can charge the battery by using either the included AC power adapter or connecting the provided USB cord to your computer. We recommend using the provided AC power adapter.
When the battery is charging, the charge indicator LED will be yellow. When fully charged, it will turn green. It will be OFF if not connected via USB or if not charging.
Charge the device in a well-ventilated area only. While charging the device do not cover it with anything such as a blanket, pillow or your child's body. Never allow your child to sleep with or on the device while it is charging.
Never attempt to repair or modify the LEAPPAD Ultimate tablet. Contains no user-serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact or fall, immediately remove this product from use and contact LeapFrog Consumer Services.
For service information, go to: leapfrog.com/support
Use only the AC adapter provided with the product.
Not suitable for children under 3 years. Misuse of transformer (AC Adapter) can cause electric shock.
(Note: The word "transformer" is sometimes substituted for the word "adapter.")
Unplug the AC Adapter (transformer) if any of the following conditions exist:
To clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse in water or use soap or other chemicals.
Allow to dry before reusing. Do not connect to the AC outlet if wet or damaged.
DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK or EU); ~ 240VAC, 50Hz (for AS/NZL) Output: DC5V, 1.5A, 7.5VA
Declaration of Conformity
Trade Name: LeapFrog
Model: 6020
Responsible party: Leapfrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100, Emeryville, CA 94608
Telephone Number: 510-420-5000
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Note: Changes or modifications to this unit not expressly approved by LeapFrog could void the EMC and wireless compliance and void the user's authority to operate the equipment. This product demonstrated EMC compliance using compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
USB Cable
The USB cable provided with this product complies with FCC and other regulatory Emission limits. If using other than the provided USB cable, please note that in order not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download LeapFrog LEAPPAD ULTIMATE 6020 - Tablet Parent Manual
Advertisement
Need help?
Do you have a question about the LEAPPAD ULTIMATE 6020 and is the answer not in the manual?
Questions and answers