LeapFrog LeapPad Jr. Parent Manual & Instructions

Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
Get Started and Download Your
Included Learning Apps
Read all the Operating & Important Safety Instructions before using LeapPad
Get started in 6 easy steps!
1. Pull out the strip from the backup battery located on the
bottom of product to enable the real-time clock.
2. POWER UP and turn on your LeapPad® Jr. by inserting
batteries and creating your player profiles (up to 3).
3. SET UP your device by installing the LeapFrog Connect
Application at leapfrog.com/connect.
4. REGISTER your device by creating a LeapFrog parent account.
5. DOWNLOAD your included learning games and apps.
6. PLAY & LEARN! Your child's LeapPad® Jr. is now ready.
NOTE: The LeapFrog Connect application and download apps may take 20-30 minutes to download with a high-speed
Internet connection.
Get your included learning apps
when you complete device set-up!
Visit leapfrog.com/support for additional
tips and FAQs.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LeapPad® Jr.. Failure
to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LeapPad® Jr. or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other
products before using with LeapPad® Jr.. LeapFrog is not responsible for the
operation of third-party accessories or their compliance with safety and regulatory
standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any
damage or broken parts, remove toy from use.
WARNING: The USB Cord or AC Adapter could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked,
immediately remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high
volume, may result in permanent hearing loss. When using headphones or ear buds, it is
recommended that the product is listened to at lower volumes for shorter periods of
time. Set the volume while in a quiet environment; turn the volume down if you cannot
hear people speaking near you. Limit the listening time to 90 minutes, followed by a quiet
period. The louder the volume, the less time required before your hearing may be affected.
If you experience ringing in your ears or hear muffled speech, stop listening and have
your hearing checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes
or patterns. Play/watch in a well-lit room and take 10- to 15-minute breaks every hour.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable,
or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
Jr.
Speaker
D-Pad
Home Button
USB Connector
Earphone Jack
DC Jack
® Jr.
Power Button
Volume Control
Parent Settings
Parent Settings allows you to control your child's play on these
interactive LeapPad ® Jr. features:
• Child profile—Easily manage permissions and profile information or add a new profile.
• Device Settings—Manage settings like time, date and more.
If you change your 4-digit parent lock-code, please connect the device to LeapFrog
Connect so your changes can be saved to your account. Parent Settings can be accessed
from the Sign In screen by pressing the Parent Settings icon to log in with your parent
lock. Alternatively, you can log in via the Settings icon on the Home Bar of the child's
Home Screen.
Forgetting or resetting your parent lock code
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to
reset your parent lock, you can do it from the device or reference the FAQ section for more
information.
Operating Instructions
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
WARNING: This product contains a Button or Coin Cell Battery. A swallowed
Button or Coin Cell Battery can cause internal chemical burns in as little as two hours
and lead to death. Dispose of used batteries immediately. Keep new and used batteries
immediately. Keep new and used batteries away from children. If you think barreries
might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
Repairing or Modifying LeapPad
Never attempt to repair or modify as LeapPad® Jr. does not contain any user-serviceable
parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe
impact or fall, immediately remove this product from use and contact LeapFrog Consumer
Services.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use AC Adapter with 6V DC output, center positive, with suitable plug.
WARNING: Not suitable for children under 3 years. Misuse any transformer/AC
Adapter can cause electric shock.
(Note: The word "transformer" is sometimes substituted for the word "adapter."
Use AC Adapter with 5 - 6V DC output with 3.5mm/1.3mm and center positive DC plug.)
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer
shall be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and
use to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the USB Cord or the AC Adapter if any of the following
conditions exist:
• The USB cord or the power cord or plug has become frayed or
damaged.
• It is exposed to rain, liquid, or excessive moisture.
• Enclosure has become damaged.
• The toy is only to be connected to Class II equipment bearing the
following symbol .
91-003547-003
US
Camera/Video Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
Recorder places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave
the product in your car as the temperatures in parked cars can exceed the acceptable
Earphone Jack
storage temperature. Exposure to extreme temperatures can result in shortened battery
DC Jack
life or cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
Microphone
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Volume Buttons
Do not connect to computer or the AC Wall outlet if wet or damaged.
AA Battery cover
Camera/Video
Battery Installation
Recorder
Backup Battery
• Make sure the tablet is turned off.
Stylus • Slide the battery covers to open the battery door,
then remove the covers.
Stylus Tether Point
• Insert 4 AA alkaline batteries as shown in image2,
batteries not included
AA Battery cover
• Make sure to replace the battery covers.
Backup Battery Replacement
• Make sure the tablet is turned off.
• Locate the backup battery cover on the back of the tablet,
then open it with a screwdriver as shown on the image to the right.
• Insert one CR2032 battery in the battery compartment with the + side facing up.
• Make sure to securely replace the backup battery cover.
To clean USB cord or disconnect it from computer or wall and clean
with a cloth dampened with water. Do not immerse in water or use
soap or other chemicals. Allow to dry before reusing. Do not connect
USB cord to computer or to outlet if wet or damaged.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
® Jr. two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name:
Model:
Product name:
Responsible party:
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution : Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This product demonstrated EMC compliance using compliant peripheral devices and
shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference
to radios, televisions, and other electronic devices.
USB Cable. The USB cable provided with this product complies with FCC and other
regulatory Emission limits. If using other than the provided USB cable, please note that in
order not to exceed FCC and other regulatory emissions limits, a shielded cable must be
used.
1
2
3 4
Supplier's Declaration of Conformity
LeapFrog®
6053
LeapPad® Jr.
Leapfrog Enterprises, Inc.
6401 Hollis Street, Suite 100, Emeryville, CA 94608
leapfrog.com