Page 1
MO-EL S.p.a. Via Galvani, 18 42027 Montecchio Emilia (RE) ITALY tel +39 (0522) 868011 fax +39 (0522) 864223 www.mo-el.com - info@mo-el.com PURIFICATORE D’ARIA AIR PURIFIER SAN002 SAN002 USO E MANUTENZIONE USE AND MAINTENANCE...
USO E MANUTENZIONE AVVERTENZE IMPORTANTI PER LA SICUREZZA Prima dell’utilizzo leggere attentamente il manuale, poiché contiene importanti informazioni riguardo alla sicurezza d’installazione, l’uso e la manutenzione. Il manuale deve essere conservato e trasmesso al nuovo utente in caso di cessione dell’apparecchio. II Costruttore si riserva di variare le caratteristiche del prodotto senza preavviso.
Questo purificatore d’aria è destinato al solo uso interno. FUNZIONAMENTO Inserire la spina nella presa della corrente e premere l’interruttore A. È possibile collegare il SAN002 ad un timer esterno che accenda il prodotto ad orari prestabiliti per prolungare la vita delle lampade. POSIZIONAMENTO Posizionare il SAN002 su mobili, mensole o sul pavimento, ma sempre in posizione verticale.
Page 6
PULIZIA E SOSTITUZIONE DELLE LAMPADE Prima di effettuare qualsiasi operazione di manutenzione, assi- curarsi che il SAN002 sia disconnesso dalla rete elettrica. - Come mostrato in Fig.8, svitare le 2 viti all’interno del coperchio superiore. - Rimuovere il coperchio superiore tirandolo verso l’alto(Fig. 9A).
USE AND MAINTENANCE IMPORTANT SAFETY INSTRUCTIONS Before using your appliance, read carefully the instructions con- tained in this booklet, which includes important information regard- ing installation, use and maintenance safety. The booklet must be kept and given to any new user of the machine. The Manufacturer reserves the right to vary the features of the product without prior notice.
POSITIONING This air purifier is intended for indoor use only. Place SAN002 on furniture, shelf or on the floor, but always in a vertical position. It’s also possible to fix the appliance to the wall in three different ways. To fix it like in Fig.4 you just need to screw the holder to the wall.
Page 9
REPLACING FLUORESCENT BULBS Before make any maintenance make sure that the SAN002 is disconnected from the wall socket. - As showed in Fig.8, unscrew the two screws inside the top cover. - Remove the top coper pulling it up(Fig. 9A).
Page 12
Questo manuale è disponibile in formato digitale sul sito This manual is available in digital format on the website www.mo-el.com 008079 - 10/2021...
Need help?
Do you have a question about the SAN002 and is the answer not in the manual?
Questions and answers