Digital Barriers EDGEVIS HD-IP150 Installation Manual
  1. Manuals
  2. Brands
  3. Digital Barriers Manuals
  4. Media Converter
  5. EDGEVIS HD-IP150
  6. Installation manual

Digital Barriers EDGEVIS HD-IP150 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

E
V
HD-IP150
DGE
IS
HARDWARE INSTALLATION GUIDE
VERSION 8.0 – NOVEMBER 20
Thank you for purchasing the EdgeVis HD-IP150. This document explains how to physically configure the HD-IP150. As
well as identifying the available connectors and status indicators on the device, it also details how to add your desired
SIM card to it. This document should be read in conjunction with the IP Series, HD-Q800, 4K-R800 - Setup Guide,
which covers the web-based setup interface for all devices in the IP Series range, including the HD-IP150.
ã Copyright 2020 Digital Barriers plc

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDGEVIS HD-IP150 and is the answer not in the manual?

Questions and answers

Related Manuals for Digital Barriers EDGEVIS HD-IP150

Summary of Contents for Digital Barriers EDGEVIS HD-IP150

  • Page 1 VERSION 8.0 – NOVEMBER 20 Thank you for purchasing the EdgeVis HD-IP150. This document explains how to physically configure the HD-IP150. As well as identifying the available connectors and status indicators on the device, it also details how to add your desired SIM card to it.

  • Page 2: What Is In The Box

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Introduction Before proceeding with the installation and setup of your HD-IP150 unit, please ensure that you check the package contents listed below, refer to the installation notes on the next page and consult the Quick Start Guide that was supplied with your unit for step-by-step instructions on preparing hardware and software components.

  • Page 3: Safety Notes

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE SAFETY NOTES The EdgeVis Encoder has been designed for use in indoor environments. It can operate in temperatures from 0˚C to +55˚C whilst powered from 12V DC. All deployments of an HD-IP150 encoder unit should ensure that the device is not mounted: •...

  • Page 4: Section 1- Basic Operations Of The Unit

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Section 1- Basic operations of the unit The EdgeVis HD-IP150 is a small and robust device, ideally suited for use in fixed installations for the recording and live streaming of video from a single IP camera.

  • Page 5: Status Indicators

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Rear Panel Layout RS232 port HDMI video connector VGA video connector RS232 port Digital I/O connector 12V power input connector Status indicators The status LEDs on the top left of the front panel (see 9. in the front panel layout) provides visual feedback on device status.

  • Page 6: Connecting Ip Cameras

    Series, HD-Q800, 4K-R800 - Setup Guide v8.0. Updating the software on the unit Once notified of a new software release by Digital Barriers, updates are available for download from the EdgeVis support site (see below for link) for installation onto the device.

  • Page 7: Section 2 - Configuring Communications On The Hd-Ip150

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Section 2 - Configuring communications on the HD-IP150 The HD-IP150 supports communications over 3G/4G cellular, Wi-Fi and wired LAN connections. A cellular connection requires the insertion of a valid SIM card. Each of the communication methods are set up using the HD-IP150 web-interface Comms Settings page.
  • Page 8 EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Step 3 Remove two screw fixings, lift the card and gently pull it out from the connector Step 4 Push the SIM card holder frame in the direction indicated by an arrow to open the holder.
  • Page 9 EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Connecting over a Wi-Fi network The HD-IP150 supports Wi-Fi communication through the use of an external USB Wi-Fi Dongle (supplied). Please refer to Appendix A of the IP Series, HD-Q800, 4K-R800 - Setup Guide for a list of supported devices.

  • Page 10: Setting Up The Encoder

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Section 3 – Next Steps… After unpacking the encoder, inserting a SIM card, and wiring up your encoder the next step is to perform the initial setup, where comms settings, server details and IP Cameras are configured.

  • Page 11: Appendix A - Troubleshooting And Frequently Asked Questions

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Appendix A - Troubleshooting and frequently asked questions How many channels does the HD-IP150 support? The HD-IP150 can record up to two cameras, and transmit one of those cameras. What level of recording and streaming performance is achievable? Based on the processing power of the HD-IP150, the unit can typically achieve 25/30 fps of 1080p quality recording whilst simultaneously streaming one 1080p quality video at 10 fps.
  • Page 12 EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE What bearers can the HD-IP150 use to transmit video to EdgeVis Server? The HD-IP150 includes an inbuilt 4G/LTE cellular modem for efficient streaming over commercially available cellular networks. It can also transmit using its inbuilt LAN port or optional Wi-Fi module. EdgeVis optimises its transmission to the characteristics of the bearer that it is being used to maximise performance.

  • Page 13: Appendix B - External Device Dimensions

    EDGEVIS HD-IP150 HARDWARE INSTALLATION GUIDE Appendix B - External Device Dimensions 198mm ISSUED: 10 NOVEMBER 2020 PAGE 13...

  • Page 14: Fcc Compliance

    Directive 89/336/EEC for EMC conformity The EdgeVis HD-IP150 Encoder contains a radio module that has been approved for integration into fixed and mobile applications. The r a d i o m o d u l e conforms to the following European Union Directives: •...

Table of Contents