Technical Specifications - Karma SET 5002 Instruction Manual

FUNCTIONS
CH A VOLUME CONTROL
1.
Use it to adjust the volume of CH A
2. CHANNEL A RF LED
Led indicating the correct connection
between the receiver and the related
microphone of CH A
3. POWER LED
It lights up to indicate that the receiver has
been correctly turned on.
CHANNEL B RF LED
4.
Led that signals the coupling between the
receiving base and the relative microphone
of channel B
5. CH B VOLUME CONTROL
Use it to adjust the volume of CH B
Receiver's power supply
Operating range
Channels
Frequency band
Sensitivity
Frequency reponse
Receiver's output impedance
Transmitter's power output
Transmitters' power supply
Dimensions
Weight

TECHNICAL SPECIFICATIONS

5V
Power adaptor input: 100V- 240V ~ 50-60 Hz 0,2A max
Power adaptor output: 5V
50 m
2
UHF (5 frequency pairs available)
-96 dbm
30Hz - 20 KHz
600 Ohms
10dbm
2 x AA 1,5V batteries (not included)
210 x 37 x 155 mm (receiver)
1,2 kg
AVAILABLE FREQUENCY PAIRS
CH A
1) 679,10 Mhz
2) 682,30 Mhz
3) 685,20 Mhz
4) 688,30 Mhz
5) 690,80 Mhz
6. ON / OFF BUTTON
Use it to switch on the product.
The related led will light on.
7. AUDIO OUT
This pre-amplified mixed output (A+B) can be
connected to the microphone input of your
mixer or amplified speaker.
DC 5V POWER SUPPLY SOCKET
8.
Connect here the included power adaptor.
The product can be powered from any 5V
USB socket.
ANTENNAS
9.
Use and adjust them to improve reception.
Note: the wireless microphone is supplied with
one of the frequency pairs indicated at the bottom
of this page.
(via included power adaptor or USB socket)
CH B
663,10 Mhz
666,10 Mhz
669,10 Mhz
672,10 Mhz
675,20 Mhz
11
500mA