Table of Contents
Advertisement
All manuals and user guides at all-guides.com
The projector can intelligently optimizes the brightness
and color saturation of projected image. The feature
greatly enhances dark detail visibility and color saturation.
•
•
•
•
LumiSense
Use this function to choose a proper color according to the
wall. There are several choices, including White, Light
Wall Color
Yellow, Light Blue, Pink and Dark Green. It will compensate
for the color deviation due to the wall color to show the
correct image tone.
Adjusts the brightness of the image.
•
Brightness
•
Controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Contrast
•
•
Adjusts a video image from black and white to fully
saturated colors.
•
Saturation
•
Off: For normal mode.
Normal: For enhancing the details in the dark area.
Boost: For boosting brightness of the projected image.
Dynamic Black: automatically optimizes the display of
dark movie scenes enabling them to be shown in
incredible detail.
When this function is enabled, BluelightShield will
be automatically set to "Off".
LumiSense function is unavailable when 3D is set to
"On"
Press
to darken the image.
Press
to lighten the image.
Press
to decrease the contrast.
Press
to increase the contrast.
Press
to decrease the amount of color in the
image.
Press
to increase the amount of color in the
image.
17
Advertisement
Table of Contents
