Controls And Indicators; Charge Rate Selection - Solar Charge IT! 4745 Owner's Manual

The charger is equipped with a digital control panel, which allows the operator to select the operating voltage and
functional mode. Using the Voltage Selector Button (V), the operator can choose the operating voltage to match that of
the system being serviced. Using the Mode Selector Button (A), the operator can choose among several charging rates
(40A/20A/2A) or select engine start mode. The control panel features a 7-segment display to provide details related to
the service battery and LED status lights to indicate charging progress.
Control Setting Instructions

Charge Rate Selection

Set the Mode Selector Button (A) to the charge rate that is appropriate for the size and type of battery being
charged. Use the battery manufacturer's specific instructions or see the guidelines below. The charger is designed
for use with 12 Volt batteries only. Do not begin charging if the battery voltage cannot be determined.
Small Motorcycle type
Lawn mower/tractor
Deep-cycle
Maintenance-free Automotive or Marine Cranking
Unless alternate information is supplied for the particular battery, always charge small 12 Volt batteries at no more
than 2 Amps.

CONTROLS AND INDICATORS

2 Amps or less
2 Amps or less
20 Amps or less
40 Amps or less
9