Table of Contents
Advertisement
2
General
2.1
Abbreviations
The abbreviations used are explained below:
V60 = image analysis program from the VisionTools company
PPE = personal protective equipment
I/O = input/output
MDL = module light
2.2
Information on the manual
This technical manual contains important instructions for working with the product named on
the cover sheet. The prerequisite for workplace safety is the observance of all safety and
handling instructions specified in this manual. The local accident prevention regulations and
national health and safety regulations must be observed in addition to the instructions in this
manual. All information and instructions are to be carefully read before use. The manual is a
product component and must be kept accessible to the plant operator at all times.
2.3
Documents enclosed
Declaration of Conformity
2.4
Safety information
In this manual, icons (acc. to EN ISO 7010) are used to highlight correct text passages and
relevant sections. If the product is sold in a non-EU country, the warning symbols may need
to be amended, if necessary.
The signal word describes the severity of the impending risks:
Danger! Imminent dangerous situation which will result in serious bodily injury or death.
Warning! Potentially dangerous situation which could result in serious bodily injury or
death.
Caution! Potentially dangerous situation which could result in minor bodily injury or
death. Also warning of damage to property.
Note! For application instructions and other important information.
Technical Manual
Version 1.5
General
2
Advertisement
Table of Contents
