Table of Contents
Advertisement
5
Commissioning
5.1
Initial operation
Specifically, the following points should be noted:
The specified operating voltage of the MDL (The operating voltage can be found in
chapter Technical Data)
The MDL glows continuously because the slider is in the delivery status is at the second
position. (see Settings)
5.2
Return to service
Specifically, the following points should be noted:
The setting of the slide switch (see Settings)
If necessary, the surface of the MDL should be cleaned with a dry cloth to eliminate dust
and other dirt.
Technical Manual
Version 1.5
Commissioning
8
Advertisement
Table of Contents
