Advertisement
OIL INJECTION INSTRUCTIONS:
A. FOLLOW THE DYE INJECTION INSTRUCTIONS TO PURGE AND FILL THE CONTAINER.
B. INJECTION
1. Turn the A/C system and engine off!!
2. Connect injector to the low side service port of A/C system. Hold body of injector. Use ( I ) starting line on handle end
as a guide. Turn handle clockwise to inject 1 application of oil.
(Approximately 3 1/4 turn(s) for 1/4 oz oil).
3. Disconnect injector from the system and clean any excess oil left around the service port
(Fig.)
(1)
(2)
(2A)
(2B)
(4)
(5)
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
(4)
(3)
(4)
(2B)
(5)
Part #
53223-001A
53223-001B
53223-001C
53223-001D
90333-UV
90336
For parts or service contact the service department: 1-888-825-6989
(2)
(2)
(2A)
Description
Dye Injector Body
Cap (only)
O-Ring
Hose Assembly
R12 (1/4" FL) Shut-Off Valve
O-Ring for 90333-UV
(1)
(1)
53123-INST
Advertisement
