Download Print this page

EnGenius SN-902 Compact Quick Installation Manual page 2

Advertisement

a. Initiates an intercom call to another handset, or a group handset
(group paging) to all registered handsets.
b. Intercom calls are digital, secure duplex (2-way), and are transmitted
without connection to the base station.
4.
BROADCAST (
a. Half duplex ( 1-way) broadcasting to handsets for immediate
announcement
b. Half duplex ( 1-way) broadcasting to base stations
Re:Press the
broadcast function.
5.
Left/Right Soft Keys (
a. Make menu selection.
6. Up(
) /Down(
a. Scroll through records and menu selections.
b. Adjust receiver voice volume when in the Talk mode.
c. Press
to review call log when in the Standby mode.
d. Press
to enter phonebook when in the Standby mode.
7.
END; On/Off Key (
a. Ends a call.
b. Leaves current menu operation, up one level.
c. Press for 3 seconds to power off the handset.
Base Features
1. Reset Button (RESET)
a. Restores base station to factory settings
b. Reset button is recessed to prevent accidental system
reset.
c. All handsets (including administrator) and additional
base(s) need to be re-registered after a base station reset.
2. Page Button (PAGE)
To search for a misplaced handset; press "PAGE" button, all
registered handsets will beep for 30 seconds.
Press "PAGE" again or any key on a handset to stop beeping..
3. Registration Button (PAGE)
Enters registration mode along with handset, assigns handset
ID (11-19).
4. Line Jack
Standard RJ-11C/CA-11A connector to plug in the telephone
line
5. Telephone Jack
A second RJ-11C to plug in an answering machine or handset.
6. DC In: to plug in the power adaptor
)
key (in the middle of handset) to activate the
)
) Scrolling Keys
)
2

Advertisement

loading