Product Overview; Package Components; Power Requirements; Product Specifications - RaceAmerica 6860D Owner's Manual

Large digital display
Table of Contents

Advertisement

PRODUCT OVERVIEW

The Model 6860 Large Digital Displays
are microprocessor controlled systems based
upon the 7-segment format display digit using
the latest technology Ultra-Bright LEDs. The
display uses an RS232 hardwired serial link or
internal wireless to receive data to be displayed.
The serial link is configured for 9600 baud. The
6860 is capable of displaying numbers 0 through
9 and alpha letters A through Z with the exception
of K, M, and W. Selected punctuation marks are
also among the displayable character set listed in
the back of this manual. The 6860 is designed to
connect to RaceAmerica AC4 autocross timers,
RaceAmerica custom timers, personal computers
running race management software, and selected
non-RaceAmerica timers. Timer selection and
data format is selected through the DIP switch
settings located on the rear of the display. Data
connections can be via hard wire or via Wireless
Data Network Link units.
These displays are all available with
internal batteries/external chargers and wireless
communications for remote placement.
The wireless option requires a transmiter at
the data source and a receiver at the display. The
receiver can be internal (from factory) or external.
NOTE: THIS PRODUCT USES ULTRA-
BRIGHT LED TECHNOLOGY. DUE TO THE
BRIGHTNESS LEVEL OF THIS DISPLAY,
CARE SHOULD BE TAKEN, AS WITH ANY
BRIGHT LIGHTING SOURCE,TO AVOID
PROLONGED VIEWING AT CLOSE RANGE
AND SHORT DISTANCES. AS WITH ANY
BRIGHT LIGHTING SOURCE, VISION MAY
BE AFFECTED SHORT TERM SIMILAR TO
CAMERA FLASHES.

PACKAGE COMPONENTS

1 - Large Digital Display Unit
1 - Power Patch Cord
1 - Owner's Manual
Model 6860 Available Options:
06-X100 RS232 Cable up to 100'
4520/4620 External Wireless Unit
'W' option - Internal Wireless 900MHz
'BZ' option - Internal Wireless 2.4GHz
6501A AC Power Adapter
6076B Carry Case
7606B Display Stand (40" tall)
LOCAL REQUIREMENTS
Additional items required to operate the 6860
Series Digital Display and options:
1 - 12VDC automotive battery
Other options:
AC power source for AC adapters

PRODUCT SPECIFICATIONS 6860

Display Type:
Digit Height:
Number of digits:
Dimensions:
Mounting:
Housing:
View Filter:
View Range:

POWER REQUIREMENTS

The Large Display can be powered by
a 12VDC automotive battery or any 12VDC
power source capable of 0.85 ampere current
load maximum. Average power consumption is
approximately 0.4 ampere. Maximum voltage
should never exceed 13.2VDC at the Power
Input Connector (NO chargers or running cars).
RaceAmerica Large Digital Display
7-Segment
Eight Inch Tall
Six
14-1/4" x 46-3/4" x 3"
Top 1/4" Eyelets - 30" c
Powder coated steel
Red Transparent acrylic
320' in full sun
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

6860dw6860dz

Table of Contents