Related Manuals for Sound Anchors Vandersteen III
Summary of Contents for Sound Anchors Vandersteen III
- Page 1 Sound Anchors Vandersteen III Instructions Sound Anchors 2835 Kirby Cir NE Unit 110 Palm Bay, FL 32905 321-724-1237 Office@Soundanchors.com www.soundanchors.com...
- Page 2 Vandersteen III stands. You will also need some hardware that is included with the speakers themselves. The Vandersteen III speakers should come with spikes at the bottom and a few ¼" bolts, as well. We will explain how to use those items in the assembly procedure.
- Page 3 These instructions will help you assemble the Vandersteen III speaker to the Sound Anchors dedicated stands. 1. The speakers should come with cones for the bottom of your set up. Using one cone for each stand, place one ½"...
- Page 4 4. Use the 3/16 Hex Wrench, included in the hardware pack, to tighten the screws in the bottom, and the one in the back one turn past finger tight. 5. Turn the speaker right-side up. 6. To set your speakers to the proper listening angle and height, refer to the Model Three Operation Manual provided with the speakers.
Need help?
Do you have a question about the Vandersteen III and is the answer not in the manual?
Questions and answers