Advertisement
Quick Links
Product Installation Guidelines
®
Ezy-Drink
SS Remote Drinking Bubbler Tap
Mouth Guard and Stem
PRODUCT CODES:
- 35188X
SPECIFICATIONS
−
Bubbler Mouth Guard is designed to operate at full mains pressure.
−
The rubber mouthguard is resistant to fungal and bacterial attack and has a high resistance to sunlight.
−
Stainless Steel construction
IMPORTANT: All Ezy-Drink
our premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without
notice.
TOOLS REQUIRED
−
Power drill
−
Spanner or adjustable crescent
© Galvin Engineering Pty Ltd
®
remote bubbler taps are tested in accordance with AS/NZS 3718 and leave
Version 1, 25
½" BSP - Male
Rubber mouthguard
N/A
Min
50
Max
500
Min
5
Max
60
N/A
Stainless Steel/Rubber
th
October 2022, Page 1 of 3
Advertisement
Related Manuals for Galvin Engineering Ezy-Drink 35188X
Summary of Contents for Galvin Engineering Ezy-Drink 35188X
- Page 1 Working Temperature Range (°C) Nominal Flow Rate (LPM) Finish Stainless Steel/Rubber NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Power drill − Spanner or adjustable crescent © Galvin Engineering Pty Ltd...
- Page 2 2. Fit Mouthguard Outlet − − Ensure the sealing rubber washers are placed Remove back nut and cup washer from the mouthguard outlet assembly underneath the mouthguard outlet. − Fit the mouthguard outlet into the trough. © Galvin Engineering Pty Ltd...
- Page 3 Turn on water WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.