Advertisement
Quick Links
Advertisement
Summary of Contents for DAH Solar DHM-72X10/FS
- Page 1 user MANUAL Reinvents the PV Module...
-
Page 2: Electrical Installation
* Don’t lift modules by junction box or connecting cables. the module (According to IEC61730 safety test, the maximum system voltage of DAH Solar Module is DC1000V) and * All the modules system should be connected to ground, if without special stipulations, please refer to International other DC electrical components require values. - Page 3 THANKS FOR CHOOSING the manual DAH SOLAR carefully Installation Safety Angle Selection - Please wear protective headcoats, insulated gloves, and rubber insulated shoes during installation job.
- Page 4 20-24mm (0.79-0.94in). bear the load. All mentioned clamp mounting methods here are only for reference, DAH Solar will not be responsible for the system design and installation. The mechanical loads and its safety must be operated and completed by the professional solar system installer and WWW.DAHSOLARPV.COM...
- Page 5 The conditions of installation, operation, using and maintenance of the modules shown in this manual are beyond the controlling range of DAH Solar, lead to any personal injury or property lose during the installation, operation, using and maintenance, and any non DAH Solar product defect caused disputes, DAH Solar does not bear any legal responsibility.