Advertisement
Available languages
Available languages
5.8 Starting the programme
Press the Start/Pause button to start the
program.
Start
symbol will light up to indicate that
the programme has started and ":" symbol
in the middle of the remaining time will keep
flashing. Drying and programme progress bar
will be displayed alternately.
5.9.Progress of programme
5.10 Child Lock
Machine is equipped with a Child Lock which
prevents interfering with the current programme
flow by pressing any button.
To activate the Child Lock:
•
Press and hold Childproof Lock button for
3 seconds.
•
Child Lock symbol will appear on the
display when the Child Lock is activated.
•
All buttons except the On/Off/Cancel and
Child Lock button on the control panel
are deactivated when the Child Lock is
active.
•
Display symbols will not change even if
the position of Programme Selection knob
is changed while the child lock button is
active.
•
When the programme selection knob is
turned and function buttons are pressed
Child Lock warning will be displayed.
•
To start a new programme after the
current programme is over or to interrupt
the current programme, the Child Lock
should be deactivated.
Dryer / User Manual
To deactivate the childproof lock:
•
Press and hold Child Lock button for 3
seconds.
Child Lock is deactivated when the dryer is
switched off and on with On/Off/Cancel button.
5.11 Changing the programme after it
has started
•
After the dryer starts operation, you can
change the selected programme and dry
your laundry in a different programme.
•
Press and hold Start / Pause button for 1
seconds to pause the programme.
•
Select desired programme by turning the
Programme Selection knob.
•
Press the Start/Pause button to start the
program.
Adding / removing laundry while the dryer
is in operation
•
In order to add or take out laundry after
the drying programme has started:
•
Press the Start/Pause button to switch
the dryer to Pause mode. Drying process
will pause.
•
While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
•
Press the Start/Pause button to resume
the program.
C
NOTE
•
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
•
You may repeat laundry adding or
removing process as many times as
you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
•
If you select a new programme by turning
the Programme Selection knob while your
drier is in Pause mode, then the current
program is aborted and new programme
information is displayed.
45
Advertisement
