Circuit Breaker Protection - Panasonic MK-F500 Operating Instructions Manual

PART NAMES
Blender, Dry Mill & Accessories
①
Working
capacity: 1 L
②
③
⑦
⑧
1. Blender Lid
2. Blender Jug
3. Blender Cutting Blade
4. Mill Container
5. Mill Cutting Blade
*The shape of the Plug may vary from illustration.

CIRCUIT BREAKER PROTECTION

When the Circuit Breaker stops the motor due to overloading, turn off the Rotary Switch to OFF position "0" and
follow the instruction below:
1. Reduce the ingredients to less than half and resume operation.
2. If it still does not start, turn off the Rotary Switch to OFF position "0" again and resume operation.
3. If all else fails, please contact your nearest service centre.
④
⑫
⑤
⑥
⑨ ⑨
OFF/RESET CIRCUIT BREAKER
PULSE
⑪
⑩
6. Mill Container Base
7. Motor Housing
8. Rubber Foot
9. Rotary Switch
10. Cord
⑬
SPEED 1
SPEED 2
11. *Plug
12. Storage Case Unit
13. Brush
7