Vax TBT3V1T1 Manual page 9

Cordless slim vac with detachable handheld
Table of Contents

Advertisement

PLEASE READ 'LET'S TALK SAFETY' BEFORE USE
CAUTION: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not
disassemble or heat above manufacturer's maximum temperature limit (60°C/140°F) or incinerate. Use of another
battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Do not
disassemble and do not dispose of in a fire. Do not attempt to disassemble the battery or remove any component
projecting from the battery terminals. The battery and charger have no user serviceable parts. Fire or injury may
result. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting. The battery is to
be disposed of safely at your local battery recycling centre.
Do not attempt to recharge non-rechargeable batteries. The battery must be removed from the appliance before it
is scrapped. The appliance must be disconnected from the charger/supply mains before use and when removing
or installing the battery into the machine. In case of battery leakages avoid any contact with the skin.
Contact our Customer Care Line on: 0800 092 7737.
Charging the cordless slim vac
NOTE: The initial charge is 4 hours and charging will be required before first use. The slim vac can be charged as
a handheld with the reach wand and tools removed or as an upright attached to the wall bracket. Failure to fully
charge the battery before first use (initial charge 4 hours) may result in poor battery performance. The machine
can remain on the battery charger once fully charged. The life expectancy of the battery will vary depending on
the usage of the slim vac.
WARNING: Do not use the slim vac when the machine is plugged in and charging.
To charge the machine
(as a handheld) detach
the reach wand and tools
and place the handheld
on a flat, stable surface.
You can also charge as
an upright slim vac when
attached to the wall
bracket.
Insert the charger lead
into the charging port
located underneath the
nozzle on the handheld.
Getting started
Plug the charging plug
into the mains.

Advertisement

Table of Contents
loading

Table of Contents