11. Attach the console assembly (D) to the Handrails
(74) with four 5/16" x 2" Screws (2) and four
5/16" Star Washers (8); start all four Screws,
and then tighten them. Be careful not to
pinch the wires and cables.
Then, insert the wires and cables upward into
the console assembly (D).
12. Identify the #8 x 3/4" Screws (5). IMPORTANT:
Do not confuse the #8 x 3/4" Screws with the
#8 x 3/4" Truss Head Screws (24). The #8 x
3/4" Truss Head Screws have flatter heads.
Start four #8 x 3/4" Screws (5) into the Pulse
Crossbar (80), and then tighten them; do not
overtighten the Screws.
11
74
Wires
8
2
12
5
13
D
Cables
8
2
80
5
74