Table of Contents
Advertisement
o Install fresh batteries into the display unit. After 5 minutes, check to see if the pressure and indoor
temperature are working correctly.
o Overpowered and underpowered
• The far right set of bars is the current pressure or the "zero mark".
• Each set of bars to the left represent the change from the zero mark for that period. There are a limited
number of bars for each period.
• Each bar on the graph represents a value of 0.03 hPa (Hecto Pascal).
• Occasionally a low front will come through that drops the pressure several bars in a short time.
• When this occurs, the graph appear to lose all bars for a given time period. This is due to the graph
having a limited number of bars per period. The unit will notice that the numeric pressure is still
showing correctly. The graph will correct itself within 1-2 days.
Note: The graph will scroll continually. This cannot be turned off.
WEATHER STATION IS BLANK: NO LETTERS, NUMBERS OR DASHED LINES
Check that the batteries connect correctly.
Batteries may be overpowered or underpowered.
Remove batteries from the weather station.
Press any button 20 times. Leave the batteries out of the weather station for 2 hours.
La Crosse Technology, Ltd.
batteries
can cause problems.
PRESSURE HISTORY GRAPH
Page 10
Advertisement
Table of Contents
