Table of Contents
Advertisement
Home Connect
en
Disconnecting from the network
D i s c o n n e c t i n g f r o m t h e n e t w o r k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
„
Set the
‹
value on the control panel.
4.
This disconnects the appliance from your home
network; the
D
symbol will go out on the control panel.
Connecting to the network
C o n n e c t i n g t o t h e n e t w o r k
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
‹
On the control panel
4.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions as per ~ "Automatic
5.
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
If your extractor hood is directly connected, first
■
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 34~ "Connecting to the network"
on page 34
34
symbol for four seconds.
0
•'‚
symbol for four seconds.
0
•'‚
value or
‚
value.
ƒ
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
‹
Set the
value on the control panel.
‚
4.
Follow the instructions in the app to complete the
5.
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking zones to the hob.
Notes
Before you can change the basic settings, the hob
■
must be switched off.
If the appliance is being operated by means of the
■
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
When the appliance is delivered, the settings
■
transmission option is already activated by default.
If the settings transmission option has been
■
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until the
0
3.
setting appears.
To activate the transfer, select the
4.
control panel. To deactivate the transfer, select the
value.
symbol for four seconds.
0
•'ƒ
symbol for four seconds.
0
•'...
‚
value on the
‹
Advertisement
Table of Contents
