Lloyd's LC-1355 Quick Manual page 20

Connect the heater to the power
supply. Press the "POWER" button
for 5 seconds until the Wi Fi LED
indicator flashes rapidly. Confirm in
(5) and click "Next" (6).
the app
Once the device is configured, you can change the name (7).
Finally, click on "Done" (8).
NOTE:
Make sure that the Wi Fi password that you
enter is correct and that the device is close to
the modem during the process.
After completing the setup, find and select the device in
(9)
the list to control it through the app from wherever you
are. Only an internet connection is required.
20
5
6
Wait for the device to
configure.
8
7
9